ausmini
https://www.ausmini.com/forums/

Dyno
https://www.ausmini.com/forums/viewtopic.php?f=2&t=12563		 Page 1 of 1
Author:  Sorceress [ Thu Oct 27, 2005 4:59 pm ]
Post subject:  Dyno
Hey Guys,
Put Merlin on the Dyno the other day.
Wondering if anyone has Dyno'd thier mini and what numbers they pulled?
Author:  gafmo [ Thu Oct 27, 2005 5:02 pm ]
Post subject: 
Good to hear from you again :wink:
What did you get and what motor do you have
Author:  cush [ Thu Oct 27, 2005 5:06 pm ]
Post subject: 
yeah.. give us the numbers, girl...
Author:  drmini in aust [ Thu Oct 27, 2005 5:09 pm ]
Post subject: 
See here for the results of the recent Sydney one at MRC Castle Hill.
It's a Dyno Dynamics, running in Shootout mode..
http://www.ausmini.com/forums/viewtopic ... light=dyno
:wink:
Author:  Sorceress [ Mon Oct 31, 2005 3:37 pm ]
Post subject: 
:oops:
Here I was thinking lil Merlin was all that but after reading those dyno results I am reluctant to post :cry:
He is running 42.6 bhp

still the 1310 with delordo
Author:  J_A_M [ Tue Nov 01, 2005 8:02 am ]
Post subject: 
thats low for a 1310. I say no two dyno's return the same result.......so don't worry too much.

Take it to a RICER dyno....you will put out 100 @ the wheels! :lol:
Author:  gafmo [ Tue Nov 01, 2005 8:04 am ]
Post subject: 
which One did you go to :idea:
Author:  Sorceress [ Fri Nov 04, 2005 3:55 pm ]
Post subject: 
Scotts Dyno at Newcastle.
We didnt take it there to get the optimum output, he was there to be tuned.
Author:  stuvz [ Fri Nov 04, 2005 11:35 pm ]
Post subject: 
just a question, u can pm me the answer, or not tell me, how much is it? and where is scotts dyno? to my recollection theres a dyno place is islington, is that it?

i want to check out what numbers mine is pullin :twisted: probably about 20bhp 8)
Author:  GeoffP [ Sat Nov 05, 2005 10:33 am ]
Post subject: 
the main point of a dyno is for tuning. You can do a power run, establish a 'baseline' and see if you can find more power by tuning things. if you want to compare power outputs with other people, the problem is that different dynos can give wildly different readings - making proper comparison impossible.

If you want to compare figures, you need to find a 'Shootout' dyno.
there's a list of them at http://www.dyno.com.au/near.htm

Geoff
Author:  simon k [ Sat Nov 05, 2005 12:06 pm ]
Post subject: 
Sorceress wrote:
:oops:
Here I was thinking lil Merlin was all that but after reading those dyno results I am reluctant to post :cry:
He is running 42.6 bhp

still the 1310 with delordo


if he wasn't couging and farting like crazy, then there's something wrong with that result. My 1310 with twin 1 1/4"s on the dyno day got 44.9 on the first go, and wouldn't go over about 4500rpm without breaking down really badly, the dyno guy gave up - most people who were there should remember. I fixed the plug and points gap and it got 51.9 on a second run, still the lowest of the cars that were running properly...
Author:  Molina [ Sat Nov 05, 2005 1:46 pm ]
Post subject: 
Mine pulled 63hp (46.9kw) with 85.7Nm recently on the dyno at Beninca Automotive in Surrey Hills (vic). 8)

Link to dyno sheet
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/