cheers will do
matt
| ausmini https://www.ausmini.com/forums/ |
|
| clubby to roundy https://www.ausmini.com/forums/viewtopic.php?f=2&t=12661 |
Page 1 of 1 |
| Author: | matt van'74 [ Sun Oct 30, 2005 5:33 pm ] |
| Post subject: | clubby to roundy |
hey all! just wondering if anyone has any links with pics of a clubman being converted into a roundie. i am just curious to see how some people have done it. If anyone has dont this themselves their pics and information would be greatly appreciated. thanks matt |
|
| Author: | IwannaMini [ Sun Oct 30, 2005 5:44 pm ] |
| Post subject: | |
send GT1310 a message... he has heaps of info on it because he is looking at converting a clubbie to a roundie for VTEC conversion |
|
| Author: | matt van'74 [ Sun Oct 30, 2005 5:46 pm ] |
| Post subject: | |
cheers will do
matt |
|
| Author: | Chris [ Sun Oct 30, 2005 7:07 pm ] |
| Post subject: | |
The yanks do it all the time, they hate clubbies. Ask on the MiniMania board. |
|
| Author: | matt van'74 [ Sun Oct 30, 2005 7:13 pm ] |
| Post subject: | |
alrigh thanks will have a look later! 
matt |
|
| Author: | feralsprint [ Sun Oct 30, 2005 7:20 pm ] |
| Post subject: | |
If the yanks do it that is reason enough not to do it, i mean the yanks are known for there fine styling of motorcars aren't they
just buy a round nose and sell the clubbie the cost of changing will be more, you have to cut evrything of from the screen forward, inner and outer guards and then try and get the new bits on right it will be a lot of work Jon |
|
| Author: | matt van'74 [ Sun Oct 30, 2005 7:27 pm ] |
| Post subject: | |
roundie vans are quite slim these days especially in Adelaide!! infact i dont think i have ever seen one here but that doesnt mean anything! i am just toying with the idea and havent made a decision yet. the rover front cut that i getting in few weeks is in good nick and is far better than mine i wasnt sure how to do it and if it weren't easy to do i wouldn't do it. i have been told by GT1310 that it is quite easy but i am not sure. I think just transferring everything from the front cut is the go. I will just ignore my horrible engine bay!! 
cheers matt |
|
| Author: | drmini in aust [ Sun Oct 30, 2005 8:00 pm ] |
| Post subject: | |
Ozmotorsport on here had one, I think Mini & Moke World did it. Bonnet was held on with pins. |
|
| Author: | J_A_M [ Sun Oct 30, 2005 8:04 pm ] |
| Post subject: | |
as above.... a LOT of work, and for what??? |
|
| Author: | TheMiniMan [ Sun Oct 30, 2005 9:07 pm ] |
| Post subject: | |
Oh look , here`s one i prepared earlier
easy-peasy & sweet as
|
|
| Author: | Mini Mad [ Sun Oct 30, 2005 9:11 pm ] |
| Post subject: | |
Matt, what arches are those on blue? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|