ausmini https://www.ausmini.com/forums/ |
|
PERTH PEOPLE- spraypainters? https://www.ausmini.com/forums/viewtopic.php?f=2&t=12709 |
Page 1 of 1 |
Author: | spini [ Mon Oct 31, 2005 7:52 pm ] |
Post subject: | PERTH PEOPLE- spraypainters? |
Tried this questoin on the old forums but didnt have much luck so thought i'd try again Does anyone in perth know of a good panelbeater/spraypainter for minis in perth? I have seen some sweet minis around perth so there must be someone painting them! Cheers, Todd |
Author: | awdmoke [ Mon Oct 31, 2005 8:00 pm ] |
Post subject: | |
* steals the thread * preferably in the Rockingham area? |
Author: | PTR_1275 [ Thu Nov 03, 2005 10:44 am ] |
Post subject: | |
Jamelka coatings. He is down in rockingham. he sponsors the SD mini club, so he has done a few minis. check out www.sdminiclub.org.au then sponsors (From memory) and it should have some contact details / website |
Author: | Marvin [ Thu Nov 03, 2005 12:48 pm ] |
Post subject: | |
![]() |
Author: | cush [ Thu Nov 03, 2005 1:19 pm ] |
Post subject: | |
awdmoke wrote: * steals the thread *
done well.. ![]() |
Author: | awdmoke [ Thu Nov 03, 2005 2:06 pm ] |
Post subject: | |
![]() email sent to Jason at Jamelka Coatings ![]() |
Author: | PTR_1275 [ Thu Nov 03, 2005 2:08 pm ] |
Post subject: | |
Fixed ![]() ![]() |
Author: | spini [ Fri Nov 04, 2005 4:52 pm ] |
Post subject: | |
who painted your clubbie PTR1275? does this jamelka place do rust repairs etc aswell? |
Author: | PTR_1275 [ Fri Nov 04, 2005 5:38 pm ] |
Post subject: | |
prefer not to refer people onto them, i dont want people to go through the same pain that i went through. i wont name them either because they have changed owners and i don't know how the new owner is. but they are aiming for insurance jobs only at the moment. Not sure if Jamelka does rust work... if not, then he would be able to recomend someone i would think. hope this helps (PS. my spray painter was not in the rockingham area) |
Author: | PTR_1275 [ Tue Nov 08, 2005 12:54 am ] |
Post subject: | |
jamelka coatings website is http://www.jamelkacoatings.com.au/ |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |