here is a clubby door that I lightened......
| ausmini https://www.ausmini.com/forums/ |
|
| door weights https://www.ausmini.com/forums/viewtopic.php?f=2&t=13056 |
Page 1 of 1 |
| Author: | inazuma_x [ Fri Nov 11, 2005 3:11 pm ] |
| Post subject: | door weights |
there was another thread on here today about the tare weight of the various mini models...now...does anyone know what the weight diff is between the various door types? sliding? winding? i know the winding ones are BLOODY heavy... |
|
| Author: | Simple [ Fri Nov 11, 2005 3:24 pm ] |
| Post subject: | |
I know the door pockets on the winding window types hold a lot of weight. If you take those off it makes a big difference. Don't know what it does to the structure though. I have taken them off to repair the rust in the doors and pockets. |
|
| Author: | Metalfab_101 [ Fri Nov 11, 2005 6:31 pm ] |
| Post subject: | |
And on the subject, do aluminium door skins make much difference? I'm sure I read them being available somewhere. |
|
| Author: | mickmini [ Fri Nov 11, 2005 9:11 pm ] |
| Post subject: | |
850 doors are the lightest, no winding mech or inner steel panel, but a bigger pocket. deluxe/K/cooper(s) doors are next. i imagine later clubby ones are a bit heavier again if they had to meet side intrusion regs? |
|
| Author: | J_A_M [ Fri Nov 11, 2005 9:22 pm ] |
| Post subject: | |
here is a clubby door that I lightened......
|
|
| Author: | mickmini [ Fri Nov 11, 2005 9:40 pm ] |
| Post subject: | |
cutting out existing rust holes does not count as lightening 
|
|
| Author: | gafmo [ Fri Nov 11, 2005 9:46 pm ] |
| Post subject: | |
Nar its just aircon |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|