ausmini
https://www.ausmini.com/forums/

Strange rear Hi / Los
https://www.ausmini.com/forums/viewtopic.php?f=2&t=13065		 Page 1 of 1
Author:  ozmotorsport [ Fri Nov 11, 2005 10:02 pm ]
Post subject:  Strange rear Hi / Los
Last time I bought a set of Hi / Los for a mini they fit straight in. THis time the ones for the rear are too long and it looks like they need about 40mm machines of them just to get them to fit even when they are on the lowest setting - what gives??
Author:  stuvz [ Fri Nov 11, 2005 10:53 pm ]
Post subject: 
maybe they are Hi-hi's :lol:

sorry, it had to be said
Author:  jill200sx [ Fri Nov 11, 2005 10:59 pm ]
Post subject: 
They dont make em like they used to :roll: ;)
Author:  drmini in aust [ Sat Nov 12, 2005 5:56 am ]
Post subject: 
Maybe those rear struts (bits of bar) are not original and were made to suit old worn cones...
Author:  ozmotorsport [ Sat Nov 12, 2005 8:19 pm ]
Post subject: 
Yeah some really strange stuff on this mini. Front suspension is pretty weaird as well.
Author:  meeni [ Sat Nov 12, 2005 8:39 pm ]
Post subject: 
maybe they are the oriional brittish hi los which were designed for rally cross cars which where made higher, so they made the bar longer, cant you just cut it donw??
Author:  ozmotorsport [ Sat Nov 12, 2005 9:10 pm ]
Post subject: 
You can only cut a certain amount off each end which is what we have done. Nice and low now - not sure how I will go when I change back to the 12" wheels from the 10s
Author:  drmini in aust [ Sat Nov 12, 2005 9:17 pm ]
Post subject: 
ozmotorsport wrote:
You can only cut a certain amount off each end which is what we have done. Nice and low now - not sure how I will go when I change back to the 12" wheels from the 10s

Just fit longer bolts to the back of them.... 8)
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/