Yello...

What would be the diff ratio of my engine.... assuming the po left the gears as they were when they put the 1098 stuff in, (it's a 998)

I've looked it up before and it's was a 1974 leyland 998 low compression engine...

i'm thinking it's a 3.2

i'm trying to figure out what revs i would have been pulling while at y mph the other day..

if it was a 3.2 it would mean about 4500-4600rpm... which seems about right, because it didnt' feel like i was thrashing it...

_________________

In Clubbies...
Most 998 rodchange were 3.44
Most 1098 remote change were 3.647.
1098 rodchange- probably 3.44.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

cheers doc

ooh.. according to

http://www.csgnetwork.com/multirpmcalc.html


it would've been 4918.. at y pmh

_________________