ausmini
https://www.ausmini.com/forums/

Rubbers for engine steady bar
https://www.ausmini.com/forums/viewtopic.php?f=2&t=13182		 Page 1 of 1
Author:  chopchop [ Tue Nov 15, 2005 10:09 pm ]
Post subject:  Rubbers for engine steady bar
Just wondering if you can buy new rubbers for the engine steady bar( clutch side one)
from any auto place or does it have to be a mini supplier.
thanks
Author:  Stuwey [ Tue Nov 15, 2005 10:13 pm ]
Post subject: 
I know my Mini supplier has 'em, in fact he has a whole box of them. (Brickworx)

I know Nolathane used to make them, i dunno if they still do or if they're good/bad. I have stuck with the rubber ones.
Author:  ss wanab [ Tue Nov 15, 2005 10:13 pm ]
Post subject: 
i got them from my local mini buissness for $ 1.50 each :wink:
Author:  ss wanab [ Tue Nov 15, 2005 10:16 pm ]
Post subject: 
Stuwey_LS wrote:
I know my Mini supplier has 'em, in fact he has a whole box of them. (Brickworx)

I know Nolathane used to make them, i dunno if they still do or if they're good/bad. I have stuck with the rubber ones.



yer steve said stick with the rubber ones
because the others fall apart after a bit of thrashing :?
Author:  aaron [ Wed Nov 16, 2005 4:37 am ]
Post subject: 
Karcraft - 85c each :wink:

Cheers
Aaron
Author:  drmini in aust [ Wed Nov 16, 2005 5:40 am ]
Post subject: 
Yep I agree the rubber ones are better- my Nolathane ones fell apart quick smart. :x
Author:  chopchop [ Wed Nov 16, 2005 7:48 am ]
Post subject: 
cheers fellas, will stick with the rubber ones.
thanks
Author:  cush [ Wed Nov 16, 2005 9:51 am ]
Post subject: 
failing that, you could always use.... :roll: .... alfoil... ;)
Author:  Spaceboy [ Wed Nov 16, 2005 1:51 pm ]
Post subject: 
i need some new engine steady rubbers too.
Author:  Wolfman [ Wed Nov 16, 2005 6:12 pm ]
Post subject: 
Thanks, you just reminded me of yet another job to do :roll: :lol:
Author:  KennyKix [ Wed Nov 16, 2005 6:27 pm ]
Post subject: 
i'm currently using the Nolathane ones, they seem to be ok so far :shock:
Author:  drmini in aust [ Wed Nov 16, 2005 6:44 pm ]
Post subject: 
Keep an eye on them. The centre hole in them is too big.. some people wrap tape around the steel bush to make it a bit tighter. :wink:
Author:  Mick [ Wed Nov 16, 2005 7:35 pm ]
Post subject: 
I've always used one of each, don't know why really, but I guess the rubber one takes the bigger bumps out, and the nolathane just does whatever the hell it pleases. Seems to have lasted 8 years now.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/