what screw to i turn on my carby to increase my idol revs?
| ausmini https://www.ausmini.com/forums/ |
|
| quick question https://www.ausmini.com/forums/viewtopic.php?f=2&t=13354 |
Page 1 of 1 |
| Author: | aussie [ Mon Nov 21, 2005 9:20 pm ] |
| Post subject: | quick question |
what screw to i turn on my carby to increase my idol revs?
|
|
| Author: | speedy [ Mon Nov 21, 2005 9:25 pm ] |
| Post subject: | |
|
|
| Author: | Stuwey [ Mon Nov 21, 2005 9:26 pm ] |
| Post subject: | |
See where the throttle cable comes down, next to the domed part of the carby? Yea? Okays, that should be connected to a little bracket with a nut on the side of it, and the cable on one end.. This is the throttle shaft. At the opposite end of the cable, there should be a screw (flat slot) which also has a hex-head. ie, not just a round screw. It will also have a spring wrapped around it. Turn this screw in (down) to increase revs, and anti-clockwise (out) to decrease 
If the revs don't rise, you've probably turned the choke adjustment. Stop, and turn that back to where it was, and try the other one. |
|
| Author: | aussie [ Mon Nov 21, 2005 9:29 pm ] |
| Post subject: | |
cheers stuwey...heaps helpful mate... also my choke isnt working anymore..ill just figure out how to fix that i guess lol |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|