ausmini https://www.ausmini.com/forums/ |
|
Mallala BATTLE DAY 2 results, now including vids: https://www.ausmini.com/forums/viewtopic.php?f=2&t=13681 |
Page 1 of 6 |
Author: | Spaceboy [ Sat Dec 03, 2005 3:23 pm ] |
Post subject: | Mallala BATTLE DAY 2 results, now including vids: |
the boys hit the track once more best ausmini time was whodat with a 1:40 with a worked 1275 w/ weber & discs then robert with a worked 1100 doing 150's then aussie and sswannabe doing 1:55's with a 998 and 1100 respectively all on drums they're prolly racing and or returning as i type this, so guys, enter your times here i will post some video action later, including the incident where the falcon hit the wall. whodat blew his motor up sometime during the first session and it gradually deteriorated during the next two sessions, hopefully he made it home okay. It was a shame, because stuwey's 1:36 was looking to be in trouble as whodat did a 1:40 in the first session, compared to stuwey's 1:45 in his first session. aussie and sswannabe battled through session 2 and 3 with very close times, and competitive racing, aussie catching under braking and in the corners, with sswannabe pulling away out of the corners and on the straight with aussie finally getting past at the end of the session with a deep braking manouver into the hairpin. i didnt go on the track today, i'll need to prepare the motor with new oil/filter and a tune. instead i donned the media jacket and headed out onto the track to take some videos. everyone did really well, and improved their times significantly since last time, especially sswannabe who was running 2:03 last time and has knocked 7 seconds off. |
Author: | bigel nigel [ Sat Dec 03, 2005 3:36 pm ] |
Post subject: | |
u make the race between aussie and sswannabe sound very spectacular, ![]() thanx for the report, lookin forward to the vids and pics |
Author: | Spaceboy [ Sat Dec 03, 2005 3:37 pm ] |
Post subject: | |
![]() ![]() |
Author: | Spaceboy [ Sat Dec 03, 2005 3:44 pm ] |
Post subject: | |
i wont have any vids until tomorrow evening or monday ![]() |
Author: | aussie [ Sat Dec 03, 2005 3:56 pm ] |
Post subject: | |
okay, last run i did i knocked another seccond off bringing my best to 1.54 ![]() ![]() dunno wats happening with hugh, he decided to take it on the track for 'one last go' and he left the track after a few laps with more engine trouble...When i left he was still trying to start the car ![]() yea the day was so much fun, first time out there - first few laps i was pretty nervous and worried about all the other cars zoomin past but it didnt take long and i got the hang of things after realising you just cant take some corners that fast ![]() sorry no pics from me but im looking forward to watchin all the vid's, cheers for doing all that spaceboy ![]() |
Author: | Mike_Byron [ Sat Dec 03, 2005 4:20 pm ] |
Post subject: | |
all good fun ![]() |
Author: | WhoDat [ Sat Dec 03, 2005 6:46 pm ] |
Post subject: | |
Well apart from the mechaincal issues - I had one of the best days I've had in years. I even enjoyed the over enthusiastic entrance into the Ess's and the less than graceful backwards exit that resulted. ![]() I had my target time and I met that and more so I'm more than happy for my first time out. I can certainly see lots of room for my own improvment in line and length, and some decent rubber would be a help. And now to the car. We did get it to run again shortly after Aussie left but it was real ugly. Something has let go big time so I had no option but to switch off and put it to bed. The only thing I know for curtain at this stage is that it is engine out time again. ![]() I've got a busted motor, no way to get home, and a grin from ear to ear. Thanks to the ausminiers that step up when needed. Thanks guys you've all done great. |
Author: | ss wanab [ Sat Dec 03, 2005 7:03 pm ] |
Post subject: | |
yer in the last session i did a 1:54 or something not to bad about 10 second off my old lap ![]() rob did a 1:48 last session ![]() great day but loved the battle with aussie ![]() ![]() ![]() cant wait for the vids who dats engine sounded so sick ![]() ![]() watch out stuwey 1:40 in the first session first time out with crap rubber ![]() its all good fun though ![]() ![]() |
Author: | Spaceboy [ Sat Dec 03, 2005 7:37 pm ] |
Post subject: | |
yer it sounded totally farked, lets hope taking it out again hasnt done serious damage ![]() |
Author: | ss wanab [ Sat Dec 03, 2005 7:52 pm ] |
Post subject: | |
its even worse than when you left ![]() |
Author: | Spaceboy [ Sat Dec 03, 2005 7:56 pm ] |
Post subject: | |
what happened after that? |
Author: | ss wanab [ Sat Dec 03, 2005 7:57 pm ] |
Post subject: | |
he went out came back in the clunk clunk he said mabye a bearing has gone in the engine ![]() |
Author: | Spaceboy [ Sat Dec 03, 2005 8:02 pm ] |
Post subject: | |
i am familiar with the frucked engine but still wanting to get out there feeling someone shoulda stopped him from going out again? ![]() |
Author: | WhoDat [ Sat Dec 03, 2005 8:27 pm ] |
Post subject: | |
Nah different issue - bottom end let go this time. Silly ne going out again was the first thing I thought - but thinking about it - it prolly would have happened on the way home if I didn't go back out, so at least this way there was ppls areound to lend a hand and help us out It's all good - just another excuse to get a few more go fast bits inserted while she's not looking ![]() ![]() ![]() |
Author: | Spaceboy [ Sat Dec 03, 2005 8:52 pm ] |
Post subject: | |
yeah, fair enough if you've got plenty of cash lying around for engine rebuilds, i thought your motor was pretty fresh though? who built it? looks like its gonna be a fair bit more expensive than the $70 you paid to get it on the track ![]() |
Page 1 of 6 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |