| ausmini https://www.ausmini.com/forums/ |
|
| 1275 rebuild suggestions https://www.ausmini.com/forums/viewtopic.php?f=2&t=13980 |
Page 1 of 1 |
| Author: | mini4350 [ Tue Dec 13, 2005 9:55 pm ] |
| Post subject: | 1275 rebuild suggestions |
hey people as you can tell from the title i got a 1275 that requires a rebuild and i havent pulled it appart to tell of the condition. I want to rebuild it and put a sc12 superchager kit on and was wondering what ideas and suggestions people had for me. Im open to suggestions so ............ |
|
| Author: | Besser [ Tue Dec 13, 2005 10:47 pm ] |
| Post subject: | budget |
best to say what your budget is...... |
|
| Author: | mini4350 [ Tue Dec 13, 2005 11:06 pm ] |
| Post subject: | |
well im not sure of an amount as i have know idea what i want let alone how much to budget for it so im open to suggestions and then ill go from there. Its for a car i plan on driving everyday so somethign reliable lol |
|
| Author: | GT1360 [ Wed Dec 14, 2005 4:48 am ] |
| Post subject: | |
well if your going to SC it.. then I would be looking at building it around the right compression ratio.. so the right pistons.. so good head work. get a cam grind, all depends on what $$ you can play with I am pulling my 1310 of this week. just to give it a xmas gift.. and I spend 1400.00 easy on new rockers, belt drive, cam followers, gaskets and seals, central oil pick up and a few other things. adds up quick... 
|
|
| Author: | ozmotorsport [ Wed Dec 14, 2005 7:39 am ] |
| Post subject: | |
GT1310 I'm not attacking you or anything so dont take this the wrong way, but in the nicest tone I can possibly type I think you Avatar is pushing the boundaries a littlle. OK lets get back to talking 1275 rebuilds cause I've got one on the cards myself. |
|
| Author: | LS1380 [ Wed Dec 14, 2005 8:55 am ] |
| Post subject: | |
I,ve got a 1275 Mk11 engine for sale.All the re-conditioning has been done.ie new pistons/rings/bearings..kept to standard 1275 spec's.This is the thick web block... Cylinder head also done.I can email pic's if you want,as I'm useless at putting pic's on ausmini. Asking price $2500.00 
|
|
| Author: | GT1360 [ Wed Dec 14, 2005 9:59 am ] |
| Post subject: | |
ozmotorsport wrote: GT1310
I'm not attacking you or anything so dont take this the wrong way, but in the nicest tone I can possibly type I think you Avatar is pushing the boundaries a littlle. OK lets get back to talking 1275 rebuilds cause I've got one on the cards myself. ROFL yeah. I may get around to changing it one day 
|
|
| Author: | TheMiniMan [ Wed Dec 14, 2005 5:23 pm ] |
| Post subject: | |
if you`re going to super charge it then go for "STRENGTH"---> the large journal crank,,,A+ rods, low comp ratio (about 8.5:1 should be sweet) forced induction specific cam shaft & some strong mother pistons without going too big in the bore for the sake of bore flex make sure the box & drop gears are totally sweet, heavy clutch (orange diaph) & quallity plate etc i`d stick with a tallish F/D ratio as it gives the blower something to push against (maybe a 3.4:1 or 3.2:1 But no taller as it can kill the accelleration too much) that is if you`re on 10" wheels maybe a decent elctronic dizzy , a motha carb/manifold combo & huge arse exhaust system to let it all outa there...when you`re getting crap loads of the stuff in there real quick, then the big problem is letting it all get back out just as nice
& i know this guy called Matt TheMiniMan in Murarrie who can build it for you
Oh, dam,,,that`s me
|
|
| Author: | LS1380 [ Wed Dec 14, 2005 7:10 pm ] |
| Post subject: | |
LS1380 wrote: I,ve got a 1275 Mk11 engine for sale.All the re-conditioning has been done.ie new pistons/rings/bearings..kept to standard 1275 spec's.This is the thick web block...
Cylinder head also done.I can email pic's if you want,as I'm useless at putting pic's on ausmini. Asking price $2500.00 Thanks for enquires about engine.All PM sent... 
|
|
| Author: | mini4350 [ Fri Dec 16, 2005 5:37 pm ] |
| Post subject: | |
well thanks mad matt on your recomendations. I am currently doing some research of my own but will be contacting engine builders in early jan. Just a question to all people in south East Qld, Who do u recommend that i ask about doing my engine?? If you dont want to say it on here you can pm me. Thanks guys |
|
| Author: | DJG-14U [ Fri Dec 16, 2005 7:03 pm ] |
| Post subject: | |
Sorry cannot help you with the rebuild mini4350. But do you mind telling me where you got that body kit for your Mini and what is it called .
Thanks.. |
|
| Author: | marcsvenson [ Fri Dec 16, 2005 7:24 pm ] |
| Post subject: | |
mate in all honesty the only person i let touch my car in se qld is Matt Read the mini man he is a wealth of knowledge and i have been going to him for ages and theres never been a prob he aint fixed with my cars hes never built me a complete engine but he is known and respected highly as an engine builder ask around give him a bell if your serious and want an engine to last |
|
| Author: | mini4350 [ Fri Dec 16, 2005 7:55 pm ] |
| Post subject: | |
i use to make the kits myself a while back, if you want more info pm me |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|