Awsome thanks for that. I'll call them up soon and see how I go, and then ask a mayte to help me put them on
. I took a photo anyway... just cause I could..
Cheers
| ausmini https://www.ausmini.com/forums/ |
|
| Hydro Help - Helper Springs https://www.ausmini.com/forums/viewtopic.php?f=2&t=13988 |
Page 1 of 1 |
| Author: | pulver [ Wed Dec 14, 2005 9:44 am ] |
| Post subject: | Hydro Help - Helper Springs |
I was Adjusting my brakes yesterday when I noticed something that might be the reason for my suspension issues. Shouldn't the springs pull the trailling arm back up ↑ towards the subframe instead of hanging ↓ there loose as buggery? Thats what they are supposed to do arn't they? I read a while ago that I should get some second hand non streched ones... I'm going to Sydney soon for new year so I should be able to pick some up then.. can anyone suggest where I can get some from? ... price? Cheers fellas. |
|
| Author: | 13secmini [ Wed Dec 14, 2005 12:08 pm ] |
| Post subject: | |
the springs should be very tight, so tight that it is a real struggle to get them on. Its a 2 person job to put them in if there good ones. I think most mini wreckers will have them, try mini spares at padstow. Mini Spares Centre (02) 9774 3366 80 Gibson Ave Padstow NSW |
|
| Author: | pulver [ Wed Dec 14, 2005 4:03 pm ] |
| Post subject: | |
Awsome thanks for that. I'll call them up soon and see how I go, and then ask a mayte to help me put them on . I took a photo anyway... just cause I could..
Cheers |
|
| Author: | drmini in aust [ Wed Dec 14, 2005 6:07 pm ] |
| Post subject: | |
There were 2 types too, the later ones (coloured orange) are stronger & better.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|