spotted n the 4/11/04 a red 850 ( i think ) with the number plates ZFK-647 driving along wentworth ave in sydney, anyonwe own or know of this car ?

_________________
lookin for another clubby

thread gets hijacked not spammed there it goes

_________________
the world is a book, and those who do not travel read only a page
66 Mini Minor sponsored by http://www.lifeonthehedge.com.au/ The Dog Harness Specialists
It was a pleasure ausmini. I'll miss all you misfits and reprobates

Spotted... yeah my dog was spotted. she was a dalmatian.

Cmon cushy lets stuff this one up too

I will....

I had a drive of the Doc's car today

_________________
Stop Licking the Dog...I Don't Care Who Started It

And, what did you think of it?

Doc pick me up from home and we went down to Padstow Pirates to have a look around...About $60 from each of us and driving back the Doc pulles over.."Your turn" Me I must admite it one of Fav Hills in the Hills District. Great to go don and even better to go up....I must admit I did give it a rev but not to the extent he does..

Love the Brakes....Suspention feels differnt (which it is) but I realy love the push you get in the back when you go over 3 to 5-6 grand..NICE

I'v had a couple of quick cars. Well one RX4 Auto (yer me) and it picked butts on the ford falcons and commondunnydoors...I love Parra Road and East Parra refinery strip.

His a little longer leged than me also

_________________
Stop Licking the Dog...I Don't Care Who Started It

I wish i could rev past 3 grand.......... i want to feel the push in the back as well!!!

_________________
I got nuthin......................

how many kays before ya "running in " process is complete?

Settle Pettal..it want be long

_________________
Stop Licking the Dog...I Don't Care Who Started It

Bout 1,000 klms........... have done about 400 so far

_________________
I got nuthin......................

Gafmo didn't try hard- sure it goes hard up to 6K, but the real action is from 6K-8K...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Doc.... whats the specs on your 1310??? (Carb or Carbs, Cam, Exhaust etc.....) Cos if thats what yours revs to i can't wait to open up Slidey

_________________
I got nuthin......................

Mate its not my Car.....But it was nice.....I Covered the Inside Guards(Hijacked) with paint striper this arvo and no more paint..All Gone.
A nice wire wheel tomorrow and a nice sunny day on Sunday..and its time for

Marine Clean..Then
Metal Ready...Then


POR15..Gloss BLACK

Disasembled the Subframe and relised I still need a cone compressure

_________________
Stop Licking the Dog...I Don't Care Who Started It

Carb is a 45DHLA Dellorto, 36mm chokes, ported out Redline 3005 manifold, 1100S block with H/T steel centre strap, flat top Mahle forged pistons, S crank & rods, Graham Russell RE-13 cam, MiniSpares forged 1.5 rockers, 35.6/31 race valves, bronze guides, C-AEA526 valve spring set.
Head is a `pretty well ported out already' one that I have since Vizarded some more, flywheel is a lightened (milled) 2 piece iron one (at the moment... ) backplate is stock S (at the moment... )
Exhaust is a Maniflow medium bore LCB with RC40 single box.
Gearbox is a stock MK2 S with 3.44 diff running 10x5 Contessas.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

crap...... mine is vaguely similar in spec to that bar the dellorto (2x 1.25 SU's), and the head was built by a guy who ported it to Group N Spec (don't know the exact specs)...... jesus i cannot wait to hear the engine rev......

Consider this Thread sucessfully hijacked

_________________
I got nuthin......................