ausmini
https://www.ausmini.com/forums/

SU HIF-6
https://www.ausmini.com/forums/viewtopic.php?f=2&t=14037		 Page 1 of 1
Author:  deleted [ Thu Dec 15, 2005 9:15 pm ]
Post subject:  SU HIF-6
Does anyone know what diameter HIF-6 Carbs are, or are there different sizes within this species.

Also, what is any old single worth in the market?
Author:  J_A_M [ Thu Dec 15, 2005 9:23 pm ]
Post subject: 
I bought a VERY nice HIF38 for ?0.01 :mrgreen:
Author:  drmini in aust [ Thu Dec 15, 2005 9:34 pm ]
Post subject:  Re: SU HIF-6
deleted wrote:
Does anyone know what diameter HIF-6 Carbs are, or are there different sizes within this species.

Also, what is any old single worth in the market?

An HIF-6 is 1-3/4". Replaced the HS6.
Author:  deleted [ Thu Dec 15, 2005 10:24 pm ]
Post subject: 
thanks guys

that wasnt .01 + postage was it jam?
;)
Author:  GT1360 [ Fri Dec 16, 2005 9:36 am ]
Post subject: 
I may be wrong... cause I cant find it anywhere in writing... But the HIF6 seams to be the turbo version.. same as a HIF 44 but a few extra in/out pipes and pressure sealed.

I think :D
Author:  J_A_M [ Fri Dec 16, 2005 9:48 am ]
Post subject: 
I also think an HIF6 has linkages on the opposite side to an HIF38/44
Author:  benjamin [ Fri Dec 16, 2005 4:16 pm ]
Post subject: 
my though was that the hif6 and hif44 are the same but the hif44 being the later of the two :? but i dunno
Author:  czerial [ Fri Dec 16, 2005 4:17 pm ]
Post subject: 
yeah the HIF6 has throtle linkages on the opposite side to the 44... the 6 was
used for turbos
Author:  benjamin [ Fri Dec 16, 2005 4:36 pm ]
Post subject: 
on the avonbar site it says hif44 turbo
Author:  GT1360 [ Fri Dec 16, 2005 4:41 pm ]
Post subject: 
Listed in minispares as HIF 6 Metro Turbo ONLY
Author:  benjamin [ Fri Dec 16, 2005 4:44 pm ]
Post subject: 
no yoer wron go eat poo :P i win

well i dunno
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/