ausmini https://www.ausmini.com/forums/ |
|
Is Karcraft open? https://www.ausmini.com/forums/viewtopic.php?f=2&t=14398 |
Page 1 of 1 |
Author: | MiniK [ Thu Dec 29, 2005 9:35 pm ] |
Post subject: | Is Karcraft open? |
I rang Karcraft today but there was no answer ![]() I assume they're closed till next week probably. Does anyone know otherwise?? |
Author: | drmini in aust [ Thu Dec 29, 2005 9:36 pm ] |
Post subject: | |
Back on 3/1, I think. ![]() |
Author: | MiniK [ Thu Dec 29, 2005 9:40 pm ] |
Post subject: | |
Thanks Kev. I'll visit them then. Additionally through old posts Ive seen discussion re outer sill panels, with Karcraft selling the UK mini version. Many differences between these and the OZ panels? |
Author: | kazjim [ Thu Dec 29, 2005 9:43 pm ] |
Post subject: | |
Enough that its probably easier to get a local sheet-metal shop to bend you up a couple !! Its what I'll be doing anyway...... J |
Author: | Monster Mini [ Thu Dec 29, 2005 9:53 pm ] |
Post subject: | |
Karcraft opens on the 3rd of jan .. im waitig for some parts my self. ![]() |
Author: | drmini in aust [ Fri Dec 30, 2005 5:29 am ] |
Post subject: | |
MiniK wrote: Thanks Kev. I'll visit them then.
Additionally through old posts Ive seen discussion re outer sill panels, with Karcraft selling the UK mini version. Many differences between these and the OZ panels? I used a pair of the wider UK so called `oversills' from Kc on the Clubby, they fitted OK. These have 6 bumps in them. I didn't want the Rover 6 vent ones- Oz cars only had 1 (pitifully small) vent anyway. ![]() Yes I cut the old ones out first, if anybody is wondering... ![]() My mate up the street got some sheet metal folded up for sills, when he restored his 1971 S. Pretty easy to do- 1 fold, and a slight bend lengthways. |
Author: | MrBob [ Fri Dec 30, 2005 7:12 am ] |
Post subject: | |
for the stupid (ie me), can you guys explain which panels you're talking about?? |
Author: | drmini in aust [ Fri Dec 30, 2005 8:09 am ] |
Post subject: | |
Outer sills, under the doors... ![]() |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |