ausmini
https://www.ausmini.com/forums/

10x6 wheels & offset (flares)
https://www.ausmini.com/forums/viewtopic.php?f=2&t=14520		 Page 1 of 2
Author:  willy [ Mon Jan 02, 2006 11:11 pm ]
Post subject:  10x6 wheels & offset (flares)
Right.
So bit of a change in wheel choice with the Deluxe.
I'm thinking of getting those 10x6 Minators.

Would Cooper S WIDE Flares cover these?

And if so, where can i buy these WIDE flares from?

Thanks.
Author:  Harley [ Mon Jan 02, 2006 11:21 pm ]
Post subject: 
I think even the standard rover type innocenti ones will do the job, and most flares are wider than that. I take it the metros didn't last long?
Author:  willy [ Mon Jan 02, 2006 11:23 pm ]
Post subject: 
Metros are still here.
An investment :lol:

Innocenti flares... nope these are 6" wide.
Innocentis only just cover 5" wide wheels.
Author:  Harley [ Mon Jan 02, 2006 11:51 pm ]
Post subject: 
Well the flares I bought for my car are monte carlo ones.
They are 2.25 inches wide.
I don't remember the width of standards, but they are less than 2 I know.
Author:  GT1360 [ Tue Jan 03, 2006 4:59 am ]
Post subject: 
MS132 - Mini special Arch 2 3/4"
MS128 - GP5 fibreglass 3"
MS133MS - WP style fibreglass 2 1/4"
MS134 - WP style ABS plastic 2 1/2"
C-AJJ3316 - GP2 fibreglass 1 3/4"
C-STN71 - GP5 Works fibreglass 2 1/2"
MS128W - GP5 Extra wide Fibreglass 3 1/2"
GAW117 - Plastic arches 1 3/4"
MS135 - Sports Pack 3 1/2"
:wink:
Author:  drmini in aust [ Tue Jan 03, 2006 5:46 am ]
Post subject: 
willy wrote:
Metros are still here.
An investment :lol:

Innocenti flares... nope these are 6" wide.
Innocentis only just cover 5" wide wheels.

10x6 (except revo's) usually stick in 1" more than 5s do, so not much different outside rim pos'n..
10x6 GBs fit legal under S flares, for example.
Author:  willy [ Tue Jan 03, 2006 12:03 pm ]
Post subject: 
Ferk i might just have to buy the wheels, then see what flares are needed.
But by the sounds of it, i'll still be right with my original choice of flare - the standard Cooper S type. :D
Author:  GT1360 [ Tue Jan 03, 2006 12:05 pm ]
Post subject: 
willy wrote:
Ferk i might just have to buy the wheels, then see what flares are needed.
But by the sounds of it, i'll still be right with my original choice of flare - the standard Cooper S type. :D


well I will go and sit one of my 10x6'' on the clubby tonight and take a pick.. cooper type flares... so should be a good guide.. if mine fit under then yours will :)
Author:  meeni [ Tue Jan 03, 2006 1:08 pm ]
Post subject: 
depends on wheel type, the ones your looking at are deep dish, they can be covered by innocenti flares but that would be borderline legal, my wood and pickets go over 6x10's perfectly, there are heaps of different style arches in that width, have a look at some english mini suppliers, they have crap loads of them!
Author:  willy [ Tue Jan 03, 2006 1:37 pm ]
Post subject: 
I am going to have to go with the 10x5 wheels with the Deluxe, as i still want to keep the Cooper S standard width flares.
Ben sent me some pics of 10x6 minators and innocenti flares, and they stick out way past the flare.
And i reckon they'd still stick out past Cooper S WIDE flares.

No good.

10x5 it is.... Image
Author:  GT1360 [ Tue Jan 03, 2006 1:39 pm ]
Post subject: 
pussy :lol:
Author:  willy [ Tue Jan 03, 2006 1:40 pm ]
Post subject: 
:lol: I'll still get those 10x6 Minators in Silver for the Rover tho. :D
Author:  GT1360 [ Tue Jan 03, 2006 1:44 pm ]
Post subject: 
pffft.. GP5's all round dude.. you know you want to.. :P
Author:  Harley [ Tue Jan 03, 2006 4:42 pm ]
Post subject: 
Put the 6's on the back and the 5's on the front! :D
Author:  feralsprint [ Tue Jan 03, 2006 6:23 pm ]
Post subject: 
yeah go on and put the 5's on the front and the 6's on the back if you want it to handle like a pig :D
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/