wonder what dipstick put it in too tight!!!
bahahah
| ausmini https://www.ausmini.com/forums/ |
|
| Dipstick stuck... no joke https://www.ausmini.com/forums/viewtopic.php?f=2&t=14521 |
Page 1 of 1 |
| Author: | stibinator [ Tue Jan 03, 2006 1:10 am ] |
| Post subject: | Dipstick stuck... no joke |
ok i went to check my oil and my dipstick is stuck? i tried using my 21inch cannons to pull it out but i didnt want to break it... tried puttin oil on it to lube it but it still wont come? anyone had this problem before? know wat to do? |
|
| Author: | h0nk [ Tue Jan 03, 2006 4:26 am ] |
| Post subject: | |
Never had or heard of that problem before.. You'd think with all the oil in there it would be constantly lubricated... have you tried grabbing it and turning as you pull? Vice grips? You could drill the head off the damn thing.. worst case you'll be looking at getting a new dipstick. Shouldn't cost too much to replace. |
|
| Author: | drmini in aust [ Tue Jan 03, 2006 5:49 am ] |
| Post subject: | |
Yeah you won't break it, dipstick tube might come out too, but no big deal. |
|
| Author: | mad-mk1 [ Tue Jan 03, 2006 8:55 am ] |
| Post subject: | |
wonder what dipstick put it in too tight!!! bahahah
|
|
| Author: | CLUBMAN [ Tue Jan 03, 2006 11:41 am ] |
| Post subject: | |
LOL. take GT1310's lead and totaly rebuild you motor with all BLING stuff |
|
| Author: | Morris 1100 [ Tue Jan 03, 2006 3:27 pm ] |
| Post subject: | |
Hmmm, Crank hit the dipstick? 
|
|
| Author: | GT1360 [ Tue Jan 03, 2006 3:43 pm ] |
| Post subject: | |
CLUBMAN wrote: LOL.
take GT1310's lead and totaly rebuild you motor with all BLING stuff Nods got home and found more parts on my door 
|
|
| Author: | 68matic [ Tue Jan 03, 2006 3:50 pm ] |
| Post subject: | |
did someone put it in the wrong way and manage to lodge it? how about trying to pull it out when the car is cold |
|
| Author: | 9YaTaH [ Tue Jan 03, 2006 3:50 pm ] |
| Post subject: | Nah.. |
Morris 1100 wrote: Hmmm, Crank hit the dipstick?
That would be something to see... I was thinking that it could be the little section that is pressed out longitudinally to make three springy interference fit things ....may have brokeddead 
|
|
| Author: | drmini in aust [ Tue Jan 03, 2006 6:14 pm ] |
| Post subject: | |
Crank is normally an awful long way from the dipstick... would need to be in a couple of pieces to hit it!! 
I would put vice grips around the dipstick tube, pull the lot out... 
|
|
| Author: | Convertible Mini [ Tue Jan 03, 2006 7:55 pm ] |
| Post subject: | Dip Stick stuck. |
I told you to get a longer one as it wasn't reaching the oil any more. You shouldn't have used the hammer to Drive it down further to reach the oil though ! I have never seen this happen. |
|
| Author: | Volodkovich [ Fri Jan 06, 2006 5:38 pm ] |
| Post subject: | |
Dude, you have BIG arms if they are 21inch...wholly jesus i wouldnt want to meet you in a dark alley |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|