ausmini
https://www.ausmini.com/forums/

Help with engine type
https://www.ausmini.com/forums/viewtopic.php?f=2&t=14542		 Page 1 of 1
Author:  Grungle [ Tue Jan 03, 2006 6:47 pm ]
Post subject:  Help with engine type
Hi All,

Am a new member and not very knowledgeable in things Mini. I have been given a 1972 Mini Clubman and would like to know what size engine it has as this is not listed anywhere on the vehicle.

I have searched the internet and found that the VIN corresponds to a 1098cc engine but I have been assured by the vehicles owner that it was only an 848cc. Is this possible?

The VIN is YG2S7 6767 build 8/72 and the Engine Number is 1017317. Any help would be greatly apprecited.

Regards
David
Author:  Morris 1100 [ Tue Jan 03, 2006 6:53 pm ]
Post subject: 
Could the engine number be missing a digit?
The first four numbers should be 1001.
Author:  min13k [ Tue Jan 03, 2006 8:01 pm ]
Post subject: 
not always as with leyland morris austin blah blah blah they were not the most relierble with numbering (as we all know) i have seen them 1016 1017 1019 ..... anyway it is a 1100 motor
and it is a standard clubman
makka
Author:  Grungle [ Tue Jan 03, 2006 9:47 pm ]
Post subject: 
Morris 1100 wrote:
Could the engine number be missing a digit?
The first four numbers should be 1001.


Sorry yes it is missing a digit. It should be 10017317

Regards
David
Author:  Grungle [ Tue Jan 03, 2006 9:50 pm ]
Post subject: 
min13k wrote:
not always as with leyland morris austin blah blah blah they were not the most relierble with numbering (as we all know) i have seen them 1016 1017 1019 ..... anyway it is a 1100 motor
and it is a standard clubman
makka


Hi Makka,

Many thanks for that. The vehicle has been semi restored (new paint) and I was just wondering if it was worthwhile to do the motor if it was the higher capacity engine which it is.

Regards
David
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/