ausmini https://www.ausmini.com/forums/ |
|
Badly needed. https://www.ausmini.com/forums/viewtopic.php?f=2&t=14569 |
Page 1 of 1 |
Author: | Mike_Byron [ Wed Jan 04, 2006 12:26 pm ] |
Post subject: | Badly needed. |
I know this is not the where a request should be however ....... I am pulling my hair out. I need an inlet manifold for a holden 308 polllution style RED motor. It also needs to be in a fairly uncorroded condition. Can't be blue motor - must be RED. Please PM if you have one |
Author: | min13k [ Wed Jan 04, 2006 1:33 pm ] |
Post subject: | |
mike i'll try a mate of mine later tonight he is at work atm he lives up the road from me see what we can do have you tried redline ??? makka |
Author: | Mike_Byron [ Wed Jan 04, 2006 3:08 pm ] |
Post subject: | |
Thanks Myles Redline - short answer is no - we have a couple of speed shops here and $400 is just too much money. The ebay rate is $80-100 for a good used one but there is none going at the moment. Its simply going on my farm ute and it doesn't need to be any quicker. A 308 tonner is not short of grunt. |
Author: | kazjim [ Wed Jan 04, 2006 3:10 pm ] |
Post subject: | |
Check Local Scrap yards.. in the "Irony Alloy" section..... I used to pick them up for about $2 / kilo.... as well as 4BBl Holleys, Rochester Quadrajets, Autolites, Strombergs etc etc etc...... Good Luck J |
Author: | min13k [ Wed Jan 04, 2006 3:10 pm ] |
Post subject: | |
should contact hardiman direct they are the guys who do the redline stuff they are at oh um someone will chime in .... ooohh i member bullicort ave millperra and they sell direct to the pubic's ![]() makka |
Author: | Morris 1100 [ Wed Jan 04, 2006 5:36 pm ] |
Post subject: | |
I might have one at my mums place. I will be able to take a look on the weekend. ![]() |
Author: | Morris 1100 [ Thu Jan 05, 2006 6:15 pm ] |
Post subject: | |
Sorry, All the ones I have are the wrong ones. ![]() |
Author: | 9YaTaH [ Thu Jan 05, 2006 7:23 pm ] |
Post subject: | Grenfell |
Morris 1100 wrote: Sorry, All the ones I have are the wrong ones.
![]() Mike...what about Grenfell...not too far from Gulgong??? ![]() |
Author: | Mike_Byron [ Fri Jan 06, 2006 9:26 am ] |
Post subject: | |
Both Grenfell and Cowra came up negative Thanks for looking anyway |
Author: | 1310/71 [ Fri Jan 06, 2006 10:36 am ] |
Post subject: | |
If you give me a model of Car(s) to go search for (or maybe a phot of it) and how much you want to pay up to, I could maybe pop out to pick'n'pay at Blacktown over the weekend for you. But don't just say red motor with pollution, you know that means nothing to me. KB |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |