Hi guys I've got a replacement starter motor on the way now how do I replace it. Do I simply unbolt it and rebolt it?? or is that ot simple
| ausmini https://www.ausmini.com/forums/ |
|
| How Do I replace my starter Motor? ? https://www.ausmini.com/forums/viewtopic.php?f=2&t=14734 |
Page 1 of 1 |
| Author: | brett [ Sun Jan 08, 2006 9:18 pm ] |
| Post subject: | How Do I replace my starter Motor? ? |
Hi guys I've got a replacement starter motor on the way now how do I replace it. Do I simply unbolt it and rebolt it?? or is that ot simple
|
|
| Author: | simon k [ Sun Jan 08, 2006 9:32 pm ] |
| Post subject: | |
yep, 2 bolts and the power cable from the solenoid - as long as you're not talking about a bini like in your avatar |
|
| Author: | min13k [ Sun Jan 08, 2006 9:33 pm ] |
| Post subject: | |
one thing just take the power cable off at the battery or you may loose all that important lucas smoke in the wires makka |
|
| Author: | brett [ Sun Jan 08, 2006 9:37 pm ] |
| Post subject: | |
NO definatly for my Cooper S not my MINI Wouldn't even think about it in the new rig, to many sensors, wires etc... |
|
| Author: | Lillee [ Mon Jan 09, 2006 8:58 am ] |
| Post subject: | |
Tip: Don't do up the wires on the starter motor too tight! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|