| ausmini https://www.ausmini.com/forums/ |
|
| 8.4 disc brake rotor thicknesses https://www.ausmini.com/forums/viewtopic.php?f=2&t=14891 |
Page 1 of 1 |
| Author: | TasTyger [ Thu Jan 12, 2006 2:39 pm ] |
| Post subject: | 8.4 disc brake rotor thicknesses |
Can someone tell me the minimum thickness it is recommended for brake rotors- 8.4 variety- before they're unsafe to use? Cheers, TasTyger |
|
| Author: | Harley [ Thu Jan 12, 2006 2:56 pm ] |
| Post subject: | |
I think it's 8mm. Second opinion anyone? |
|
| Author: | tainted [ Thu Jan 12, 2006 7:11 pm ] |
| Post subject: | |
Tas, From memory, the minimum thickness allowed is 8mm, there are a number of places to get these and I belive that the ones that I got for the Moke were 10mm thick. Timbo |
|
| Author: | minimaniac [ Fri Jan 13, 2006 8:49 am ] |
| Post subject: | |
Minimum allowed thickness is 8.5mm. Original thickness was 10mm. |
|
| Author: | Zizzle [ Fri Jan 13, 2006 10:32 am ] |
| Post subject: | |
If they are the ventilated rotors it is much more than 8mm. More like 18mm. Mine measure 20mm I think. Yep, I was right, just did a search: http://www.ausmini.com/forums/viewtopic.php?t=11021 |
|
| Author: | TasTyger [ Fri Jan 13, 2006 12:25 pm ] |
| Post subject: | |
The ones I have are the solid variety... TT |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|