Always have been that way, always will be thats way.
And if your car wobbles at 120, try doin the speed limit.
| ausmini https://www.ausmini.com/forums/ |
|
| my Minis rear wheels are pointing inwards https://www.ausmini.com/forums/viewtopic.php?f=2&t=15096 |
Page 1 of 1 |
| Author: | brett [ Mon Jan 16, 2006 8:40 pm ] |
| Post subject: | my Minis rear wheels are pointing inwards |
Hi Guys, Once again I have a Mini enquirery, My Cooper S rear wheels are pointing inwards. Any ideas how to get these straight?? My Cooper S gets speed wobbles once I get over 120km-h I think it is because of this. I bought a set of rear adjustable camber brackets and they still point in. Any ideas how to straighten the rear wheels?? Cheers Brett |
|
| Author: | Harley [ Mon Jan 16, 2006 8:44 pm ] |
| Post subject: | |
Always have been that way, always will be thats way. And if your car wobbles at 120, try doin the speed limit.
|
|
| Author: | brett [ Mon Jan 16, 2006 8:48 pm ] |
| Post subject: | |
just checking thats normal so I won't bother tearing my hair out trying to "correct" it cheers |
|
| Author: | min13k [ Mon Jan 16, 2006 9:32 pm ] |
| Post subject: | |
i think brett has a new mini brett try mini 2 or post it in the new mini section there are a few on here with bmw mini's but 99.9 % of us have the original type mini's makka |
|
| Author: | brett [ Mon Jan 16, 2006 9:51 pm ] |
| Post subject: | |
min13k wrote: i think brett has a new mini
brett try mini 2 or post it in the new mini section there are a few on here with bmw mini's but 99.9 % of us have the original type mini's makka Like me  1967 Cooper S, hey Makka coming to the Mini Muster in June Long weekend?? I'm trailing the Mini down for the weekend, bit to far for me to drive the Mini down....
|
|
| Author: | min13k [ Mon Jan 16, 2006 9:55 pm ] |
| Post subject: | |
dunno yet mate but if i do i'll drive up along the new englande love that bit of road oh and sorry i seen your avatar and thats why i assumed you had a bini hmm i wonder if your subframe is bent makka |
|
| Author: | drmini in aust [ Mon Jan 16, 2006 10:02 pm ] |
| Post subject: | |
rears are supposed to be toed in, 1/8" total. Make em even though, or it'll crab down the road... 
Shims are put between subframe and outer trailing arm brackets...
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|