must be near Pick & Paymore then? I'll check it out. I think Doogie has mentioned the same place to me before....
| ausmini https://www.ausmini.com/forums/ |
|
| Steel rim straightening https://www.ausmini.com/forums/viewtopic.php?f=2&t=15210 |
Page 1 of 1 |
| Author: | JAM_IT [ Thu Jan 19, 2006 1:29 pm ] |
| Post subject: | Steel rim straightening |
Does anyone know how much it costs to straighten a steel rim, and places that do it? I have 9 GT rims, a few of which need to be straightened out. Only minor stuff....no major curb hits. |
|
| Author: | Mike_Byron [ Thu Jan 19, 2006 1:51 pm ] |
| Post subject: | |
Anton My memory lets me down but off Sunnyholt Road Blacktown, there is a street (Berrima ?? Bessema ??? ). Down that road is a suspension, tyre type place. They machine the tread off tyres for Appendix J and HQ racers and i am sure they also have a rim roller. If not then they know who has. I took some rims there a few years ago for a mate (Peter Dane) who was racing HQs at the time. It is right down the end of that road. |
|
| Author: | JAM_IT [ Thu Jan 19, 2006 1:57 pm ] |
| Post subject: | |
must be near Pick & Paymore then? I'll check it out. I think Doogie has mentioned the same place to me before....
|
|
| Author: | monrel [ Thu Jan 19, 2006 4:01 pm ] |
| Post subject: | |
Mike_Byron wrote: Anton
My memory lets me down but off Sunnyholt Road Blacktown, there is a street (Berrima ?? Bessema ??? ). Down that road is a suspension, tyre type place. They machine the tread off tyres for Appendix J and HQ racers and i am sure they also have a rim roller. If not then they know who has. I think the street you are referring to is "Bessemer Street" (just about 5 minutes from my place) |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|