Autometer..
I have not put it in yet... but will next week.
can get autometer senders...But Just work out the new guage resistance... and just change its resistance to match the sender
| ausmini https://www.ausmini.com/forums/ |
|
| Aftermarket fuel gauges https://www.ausmini.com/forums/viewtopic.php?f=2&t=15333 |
Page 1 of 1 |
| Author: | Marvin [ Sun Jan 22, 2006 5:20 pm ] |
| Post subject: | Aftermarket fuel gauges |
Who has one? What brand? What sender are you using and how is it put in your fuel tank? |
|
| Author: | min13k [ Sun Jan 22, 2006 5:25 pm ] |
| Post subject: | |
marvin from what i remember the mini fuel sender works opposite and the ohm reading is compleatly different but a good sparky should be able to work round this makka |
|
| Author: | GT1360 [ Sun Jan 22, 2006 5:26 pm ] |
| Post subject: | |
Autometer.. I have not put it in yet... but will next week.
can get autometer senders...But Just work out the new guage resistance... and just change its resistance to match the sender
|
|
| Author: | Marvin [ Sun Jan 22, 2006 5:31 pm ] |
| Post subject: | |
min13k wrote: marvin from what i remember the mini fuel sender works opposite and the ohm reading is compleatly different but a good sparky should be able to work round this
makka Yeah I know... Empty 240 ohm 1/2 65.5 ohm Full 19 ohm for the sender I've got. |
|
| Author: | GT1360 [ Sun Jan 22, 2006 5:32 pm ] |
| Post subject: | |
K mine is a Autometer P. No:4414 ultra lite.. 33ohm Full 240Ohm Empty Depending on the modle of guage depends on its Resistance. there are 5 different ones in the autometer range |
|
| Author: | The Toolman [ Sun Jan 22, 2006 5:43 pm ] |
| Post subject: | |
Have a Classic Instruments one for mine, but it came with its own sender unit which I mounted (screwed) in the same hole as the standard mini one, needed to grind the locking ring thingy slightly, but a nice fit.. |
|
| Author: | Marvin [ Sun Jan 22, 2006 5:45 pm ] |
| Post subject: | |
The Toolman wrote: Have a Classic Instruments one for mine, but it came with its own sender unit which I mounted (screwed) in the same hole as the standard mini one, needed to grind the locking ring thingy slightly, but a nice fit..
Got a pic? |
|
| Author: | The Toolman [ Sun Jan 22, 2006 6:09 pm ] |
| Post subject: | |
Heres the sender unit after modification.. 
Here's it fitted. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|