Kev,
Was originally Lockheed, then PBR I think. Dunno if still available (I doubt it).
I have a spare one you could get linered. But most people just go buy the latest UK one from Kc or wherever- p/no GMC1008 $120 approx.
| ausmini https://www.ausmini.com/forums/ |
|
| Clutch P/N https://www.ausmini.com/forums/viewtopic.php?f=2&t=15540 |
Page 1 of 1 |
| Author: | 1310/71 [ Thu Jan 26, 2006 9:11 pm ] |
| Post subject: | Clutch P/N |
Does anyone have the Girlock part number for the 0.75 Clutch master cylinder (with the plastic tank) to suit a clubbie? I need to get one for my car and want to make sure I get the right one. Cheers KB |
|
| Author: | drmini in aust [ Thu Jan 26, 2006 9:24 pm ] |
| Post subject: | |
Kev, Was originally Lockheed, then PBR I think. Dunno if still available (I doubt it).
I have a spare one you could get linered. But most people just go buy the latest UK one from Kc or wherever- p/no GMC1008 $120 approx.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|