ausmini
https://www.ausmini.com/forums/

metro coils
https://www.ausmini.com/forums/viewtopic.php?f=2&t=15609
Page 1 of 1

Author:  chasg [ Sat Jan 28, 2006 8:10 pm ]
Post subject:  metro coils

Does anyone know the correct coil for a metro 1275 motor with electronic ignition? I am presently using a bosch gt40 coil. Apparently l have read on a few sights that with the metro electronic ignition you need a special coil.

Author:  Morris 1100 [ Sat Jan 28, 2006 8:36 pm ]
Post subject: 

The book for my Austin Montego which uses the same type of ignition as the Metro says...

Ignition Coil
Type................................ Ducellier 54041372 or 520029A
Current Consumption- engine idling... 2.3 to 2.7ohms
Primary resistance at 20?C ............ 0.77 to 0.87ohms

Distributor
Type....................... Lucas 59 DM4
Reluctor air gap ...... 0.008 to 0.014" (0.20 to 0.35mm)

Ignition amplifier ..... Lucas AB14 or Ducellier.

I know it does not answer your question but there should be enough info there for someone else to chime in! :lol:

Author:  mini_matt [ Sat Jan 28, 2006 8:52 pm ]
Post subject:  coil

ive got one at work ill check on monday if ya want

Author:  Morris 1100 [ Sat Jan 28, 2006 9:24 pm ]
Post subject: 

The coil listed in the Bosch catalogue for the Metro is part number 0 221 119 360 they do not list a GT-40 for them.

Author:  9YaTaH [ Sat Jan 28, 2006 9:28 pm ]
Post subject:  Wheels 2006

Morris 1100 wrote:
The book for my Austin Montego which uses the same type of ignition as the Metro says...

Ignition Coil
Type................................ Ducellier 54041372 or 520029A
Current Consumption- engine idling... 2.3 to 2.7ohms
Primary resistance at 20?C ............ 0.77 to 0.87ohms

Distributor
Type....................... Lucas 59 DM4
Reluctor air gap ...... 0.008 to 0.014" (0.20 to 0.35mm)

Ignition amplifier ..... Lucas AB14 or Ducellier.

I know it does not answer your question but there should be enough info there for someone else to chime in! :lol:


So are we going to see the mighty Austin Montego at Wheels 2006 in March Mike?? :wink:

Author:  Morris 1100 [ Sat Jan 28, 2006 9:57 pm ]
Post subject:  Re: Wheels 2006

9YaTaH wrote:
So are we going to see the mighty Austin Montego at Wheels 2006 in March Mike?? :wink:
I doubt it! 8)

Author:  9YaTaH [ Sat Jan 28, 2006 10:33 pm ]
Post subject:  Re: Wheels 2006

Morris 1100 wrote:
9YaTaH wrote:
So are we going to see the mighty Austin Montego at Wheels 2006 in March Mike?? :wink:
I doubt it! 8)


Starting to think this Montego is mythical Mike.....how high is the grass under it :P :D

Author:  Morris 1100 [ Sat Jan 28, 2006 10:50 pm ]
Post subject:  Re: Wheels 2006

9YaTaH wrote:
Starting to think this Montego is mythical Mike.....how high is the grass under it :P :D
It is OK, it is on concrete (unlike the Cooper S) :lol:

Author:  miniimports [ Sun Jan 29, 2006 6:47 pm ]
Post subject:  re coils

think i have some brand new ones(genuine)
pm me if interested
regards josh

Author:  simon k [ Sun Jan 29, 2006 9:21 pm ]
Post subject:  Re: Wheels 2006

9YaTaH wrote:
Morris 1100 wrote:
9YaTaH wrote:
So are we going to see the mighty Austin Montego at Wheels 2006 in March Mike?? :wink:
I doubt it! 8)


Starting to think this Montego is mythical Mike.....how high is the grass under it :P :D


I'll testify that it exists - what a wierd contraption!! :lol:

Author:  simon k [ Sun Jan 29, 2006 9:26 pm ]
Post subject:  Re: Wheels 2006

Morris 1100 wrote:
9YaTaH wrote:
Starting to think this Montego is mythical Mike.....how high is the grass under it :P :D
It is OK, it is on concrete (unlike the Cooper S) :lol:


I'll give that cooper a good home for you - what I said to you is exactly what I'd do with it, hey, I'd even keep it in mobile storage for you if you wanted ;)

Author:  chasg [ Mon Jan 30, 2006 8:41 pm ]
Post subject: 

PM Sent

Author:  Mick [ Tue Jan 31, 2006 9:37 am ]
Post subject: 

Didn't they have the resistor switched in for startup?
I think that means you will simple need the GT40R instead of the GT40.

Author:  Morris 1100 [ Tue Jan 31, 2006 4:32 pm ]
Post subject: 

Bosch recomends the GT40 range of coils for points only. They list other part numbers for all electronic systems.

Author:  TasTyger [ Fri Dec 01, 2006 7:59 am ]
Post subject: 

I know this ressurects an old thread but I need much the same info which didn't seem to be clear when the last repy was posted.

I've got an 4180A 45DM4 Lucas dizzy with the AB14 attached. The coil is Bosch 0221110999.

So the question is which of the GT40/R's can you use in that circumstance. Is it like the pulsar dizzy conversion and you can use the R version or is it same as the Petroix or other electronic kits :?: :?:

TasTyger

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/