333lbs = 151kg
no wonder my back hurts!
Still can't find that thread
| ausmini https://www.ausmini.com/forums/ |
|
| Component Weights? https://www.ausmini.com/forums/viewtopic.php?f=2&t=15933 |
Page 1 of 1 |
| Author: | awdmoke [ Mon Feb 06, 2006 3:56 pm ] |
| Post subject: | Component Weights? |
Just wondering what the standard 1100 A series+box weighs? And a bare moke shell (no subs, no nothing)? Weighed my moke shell - now 185kg Chassis - 51kg Motor/front suspension - tba Rear diff/suspension - tba |
|
| Author: | 9YaTaH [ Mon Feb 06, 2006 4:08 pm ] |
| Post subject: | Re: Component Weights? |
awdmoke wrote: Just wondering what the standard 1100 A series+box weighs?
And a bare moke shell (no subs, no nothing)? Weighed my moke shell - now 185kg Chassis - 51kg Motor/front suspension - tba Rear diff/suspension - tba There is a long thread discussing this....but I always remember 333lbs for the Motor/Gearbox combo. |
|
| Author: | awdmoke [ Mon Feb 06, 2006 4:25 pm ] |
| Post subject: | |
333lbs = 151kg no wonder my back hurts!
Still can't find that thread
|
|
| Author: | Maxi23 [ Mon Feb 06, 2006 6:30 pm ] |
| Post subject: | |
courtesy of minimania http://www.minimania.com/ArticleV.cfm?DisplayID=596&SCatagory=PANELS&DisplayType=Technical%20Information&CarType=Mini |
|
| Author: | awdmoke [ Mon Feb 06, 2006 8:12 pm ] |
| Post subject: | |
Cheers! 
|
|
| Author: | Jules [ Mon Feb 06, 2006 10:32 pm ] |
| Post subject: | |
My repair manual (genuine Austin Rover publication) specifies power unit weight of 333lb (151kg) but doesn't specify which if any ancillaries are included in this. I measured my own 1275 A+ at 308lb (140kg). This includes carb/inlet manifold/air filter, distributor, alternator, starter motor but no exhaust manifold and no radiator/fan. I haven't calibrated the scales I used but I have no reason to doubt that they are reasonably close. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|