ausmini
https://www.ausmini.com/forums/

GR Manifolds
https://www.ausmini.com/forums/viewtopic.php?f=2&t=16262		 Page 1 of 1
Author:  stibinator [ Thu Feb 16, 2006 2:49 pm ]
Post subject:  GR Manifolds
Question... i jus got a GRE manifold for my HIF44 but there is a problem... there is no where to put a bracket to hold the accelerator cable in place?
does anyone have pic of one with a bracket? or do i even need the bracket?
thanks
Author:  Simple [ Thu Feb 16, 2006 3:07 pm ]
Post subject: 
I have a GR manifold and the cables go through a bracket that sits between the carby and the manifold. see pic.

Nothing is attached to the manifold.

Image

Cheers
Author:  stibinator [ Thu Feb 16, 2006 5:57 pm ]
Post subject:  .
where would i be able to get one of these brackets?
Author:  EST-071 [ Thu Feb 16, 2006 6:12 pm ]
Post subject: 
This is what you need.
Image
Can get them from
www.minis.com.au
or
www.minisport.com.au

Pete
Author:  stibinator [ Fri Feb 24, 2006 5:39 pm ]
Post subject: 
ok i got one but i dont see how the accel cable will be attached to it?
Author:  Mike_Byron [ Fri Feb 24, 2006 6:07 pm ]
Post subject: 
You also need a HIF style accelerator cable - I am sure others can be made to fit but the HIF one is just sooo easy.

It has a nylon end piece molded into which clips onto the throttle sandwhich bracket.

The HIF throttle cable is normally yellow as in the previous photo
Author:  JAM_IT [ Fri Feb 24, 2006 6:43 pm ]
Post subject: 
use the standard Mini bracket, just as Simple Simon has done. Then you can use the same choke and accelerator cable. Simple really :lol:
Author:  Christoph [ Fri Feb 24, 2006 9:43 pm ]
Post subject: 
how much are those GR manifolds going for these days?
Author:  drmini in aust [ Fri Feb 24, 2006 9:52 pm ]
Post subject: 
Around $200 I think. :wink:
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/