ausmini :: View topic - Ping Kev

ausmini https://www.ausmini.com/forums/

Ping Kev https://www.ausmini.com/forums/viewtopic.php?f=2&t=16368	Page 1 of 1

Author:	1071 [ Sun Feb 19, 2006 11:00 am ]
Post subject:	Ping Kev
So Kev. we're on our way soon. What's had/expensive to get and what should I bring with me? Cheers,. Ian

Author:	9YaTaH [ Sun Feb 19, 2006 12:34 pm ]
Post subject:	Oi!! :-)
Lets go over this again....for the seventeenth time Remember when I said.....What do you want to do Restore the 1071 to its former glory (what else needs to be done??? engine just tired?? box OK?? grab a Seth Afrikan super crank???) Restore the Traveller to its former glory (fit a wood kit??) Build a stove hot weapon that you can use in both (therefore pistons and other parts would be on the list), that is, build a super donk based on the 1330 Restore the 850 to its former glory (lots of work), maybe save your pesos for a engine conversion Buy lots of stuff for Mick Make a list check it twice Fill the container....so you have no regrets

Author:	1071 [ Sun Feb 19, 2006 2:15 pm ]
Post subject:
Remember when I said.....What do you want to do Restore the 1071 to its former glory (what else needs to be done??? engine just tired?? box OK?? grab a Seth Afrikan super crank???) I think the crank is fine. I'm sure it was a piston that went. Bit hard to reemrber back almost 20 years though (damn why don't those emoticons work ) Restore the Traveller to its former glory (fit a wood kit??) Heresy heresey Why would you ruin a good Traveler with wood. I'm sure Saint Alec must have rolled in his grave (metaphorically) when they came up with that one. Build a stove hot weapon that you can use in both (therefore pistons and other parts would be on the list), that is, build a super donk based on the 1330 I've already got one of those. I have managed to get a new adjuster post for the roller rockers and hopefully a new Mk II Manifold extractror is in the post. Otherwise I've pretty much confined myself to consumables this time. (Although the new Minilites should look good). Restore the 850 to its former glory (lots of work), maybe save your pesos for a engine conversion There is a guy in the club here doing a special Honda subframe. Although, I'm more inclined towards Suzie myself..... Buy lots of stuff for Mick Possibly....anything special on your mind ??? Make a list check it twice Fill the container....so you have no regrets Don't talk to me about lists... Its getting to the point where we have to start getting serious about inventories... Be seeing you soon.... _________________ "Show me the Mini!"

Author:	min13k [ Sun Feb 19, 2006 2:19 pm ]
Post subject:
when yer in sydney come to my garadge and finnish cleaning it out makka

Author:	9YaTaH [ Sun Feb 19, 2006 4:39 pm ]
Post subject:	Hes thinking about it!!
[quote="1071"][/quote] Restore the 1071 to its former glory (what else needs to be done??? engine just tired?? box OK?? grab a Seth Afrikan super crank???) I think the crank is fine. I'm sure it was a piston that went. Bit hard to reemrber back almost 20 years though (damn why don't those emoticons work ) So a first overbore piston/ring set is in on order Restore the Traveller to its former glory (fit a wood kit??) Heresy heresey Why would you ruin a good Traveler with wood. I'm sure Saint Alec must have rolled in his grave (metaphorically) when they came up with that one. Yeah....I agree, if it werent there in the first place why stick on some wood or worse...drill some holes...just that the woodies do look nice Build a stove hot weapon that you can use in both (therefore pistons and other parts would be on the list), that is, build a super donk based on the 1330 I've already got one of those. I have managed to get a new adjuster post for the roller rockers and hopefully a new Mk II Manifold extractror is in the post. Otherwise I've pretty much confined myself to consumables this time. (Although the new Minilites should look good). So the 1330 is at the peak of its development for road use Restore the 850 to its former glory (lots of work), maybe save your pesos for a engine conversion There is a guy in the club here doing a special Honda subframe. Although, I'm more inclined towards Suzie myself..... Contact Blumin and others on Ausmini before you do anything Buy lots of stuff for Mick Possibly....anything special on your mind ??? Crosspin diff Nah...I can source everything I need to do what I want to do...but thanks for the offer Make a list check it twice Fill the container....so you have no regrets Don't talk to me about lists... Its getting to the point where we have to start getting serious about inventories... Ohhhh uplift brought forward Got a job You could throw some second hand Dellortos/Webers in the container...disk brake sets available?? etc Be seeing you soon.... Great Breathe...don't stress too much emoticons: place cursor wher you want to put one, then single click on the emoticon

Author:	1071 [ Mon Feb 20, 2006 1:39 pm ]
Post subject:
Great, got the emoticons under control ..Now, where are the instructions for posting pictures???

Author:	fuzzy-hair-man [ Mon Feb 20, 2006 1:47 pm ]
Post subject:
1071 wrote: Great, got the emoticons under control ..Now, where are the instructions for posting pictures??? In the How To's here's a link: http://www.ausmini.com/forums/viewtopic.php?t=10405

Author:	1071 [ Tue Feb 21, 2006 8:23 am ]
Post subject:
Thank you FHM much appreciated... Ian

Page 1 of 1	All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/