I shall check again when Im at Kazjims next.
Thanx.
| ausmini https://www.ausmini.com/forums/ |
|
| Mini Head - Missing ID https://www.ausmini.com/forums/viewtopic.php?f=2&t=16376 |
Page 1 of 1 |
| Author: | Maxi23 [ Sun Feb 19, 2006 2:16 pm ] |
| Post subject: | Mini Head - Missing ID |
I popped the rocker cover on the project mini today, and from what I could see there wasnt and identifying marks on the head. I know there there is usually a '12G202' or '12G295' etc etc, but this had nothing. Maybe I didnd look well enough, lol. But im 90% sure that the head had no number on it. Its on a 1098 engine (as far as i know), so I just assumed it was a 12G202, but with no markings, i cant be certain. Can anyone possibly shed some light on why this might be ? Thanx, Max. |
|
| Author: | min13k [ Sun Feb 19, 2006 2:17 pm ] |
| Post subject: | |
cheak between the roker studs get a rag and clean makka |
|
| Author: | drmini in aust [ Sun Feb 19, 2006 2:20 pm ] |
| Post subject: | |
some of the later heads have the numbers cast near the #4 rocker post. |
|
| Author: | Maxi23 [ Sun Feb 19, 2006 2:22 pm ] |
| Post subject: | |
I shall check again when Im at Kazjims next.
Thanx. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|