| ausmini https://www.ausmini.com/forums/ |
|
| mini exhausts https://www.ausmini.com/forums/viewtopic.php?f=2&t=16497 |
Page 1 of 2 |
| Author: | Mini25 - UK [ Wed Feb 22, 2006 7:20 am ] |
| Post subject: | mini exhausts |
y is it that the big bore exhausts with two outlet bits at the end 
does the rhs bore hang lower than the left?? every mini with an exhaust like this one ive ever seen does this, are they like thet from manufacture, is it the way they are attached to the floor.....does any one know? coz it seems rather odd |
|
| Author: | simon k [ Wed Feb 22, 2006 8:03 am ] |
| Post subject: | |
I've never looked at one, but looking at that one, the muffler body seems to be crooked - maybe the mountings that everyone buys with them doesn't work real well and they all end up twisting...? |
|
| Author: | awdmoke [ Wed Feb 22, 2006 5:16 pm ] |
| Post subject: | |
As ^ simon said, the support hanger is offset 
|
|
| Author: | ausminis4u [ Wed Feb 22, 2006 5:21 pm ] |
| Post subject: | Re: mini exhausts |
Mini25 - UK wrote: y is it that the big bore exhausts with two outlet bits at the end my DTM looks like that to ..... maybe they were all pissed when they made the jig.
does the rhs bore hang lower than the left?? every mini with an exhaust like this one ive ever seen does this, are they like thet from manufacture, is it the way they are attached to the floor.....does any one know? coz it seems rather odd |
|
| Author: | Mini Mad [ Wed Feb 22, 2006 5:39 pm ] |
| Post subject: | |
I don't think brads does tilt like that?... |
|
| Author: | Mini Mad [ Wed Feb 22, 2006 5:55 pm ] |
| Post subject: | |
|
|
| Author: | ausminis4u [ Wed Feb 22, 2006 6:14 pm ] |
| Post subject: | |
hey josh , brads isnt a dtm, its a cannon style muffler ( well 2 actually. ) and the tips come straight where as ours are upswept. |
|
| Author: | =twista= [ Thu Feb 23, 2006 1:38 am ] |
| Post subject: | |
Mini Mad wrote: i dunno guys BUT, is it me or is brads DTC (Dual Tipped CANNON) off centre? just looking and lining up with the boot lid light....otherwise damn nice mini! 
|
|
| Author: | Mini25 - UK [ Thu Feb 23, 2006 3:50 am ] |
| Post subject: | |
yeah, a tad, |
|
| Author: | Fat Boy Dave [ Thu Feb 23, 2006 11:32 am ] |
| Post subject: | |
Quote: i dunno guys BUT, is it me or is brads DTC (Dual Tipped CANNON) off centre? just looking and lining up with the boot lid light....otherwise damn nice mini!
Nice for a Cluuby
|
|
| Author: | 13secmini [ Thu Feb 23, 2006 11:50 am ] |
| Post subject: | |
hehe yeh its alittle off, had to do it to clear the fuel pump, filter and lines under there 
|
|
| Author: | inazuma_x [ Thu Feb 23, 2006 12:01 pm ] |
| Post subject: | |
ever so slightly though...if you look at it in relation to the back (like distance from each wheel) you cant see it at all...or atleast i cant 
i dont think i would have even noticed if you guys hadn't mentioned it...the red one's problem is alot more obvious... |
|
| Author: | feralsprint [ Thu Feb 23, 2006 12:44 pm ] |
| Post subject: | |
I really think some of you have far to much time, get in the garage or go and drive a mini thats what they are made for
|
|
| Author: | Mini Mad [ Thu Feb 23, 2006 12:59 pm ] |
| Post subject: | |
feralsprint wrote: I really think some of you have far to much time, get in the garage or go and drive a mini thats what they are made for
Can't do that when your at work..this is the next best thing
|
|
| Author: | Mini25 - UK [ Fri Feb 24, 2006 12:28 am ] |
| Post subject: | |
or at school |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|