ausmini https://www.ausmini.com/forums/ |
|
clutch :( https://www.ausmini.com/forums/viewtopic.php?f=2&t=16506 |
Page 1 of 1 |
Author: | VeG [ Wed Feb 22, 2006 10:05 am ] |
Post subject: | clutch :( |
Replaced slave cylinder today (was a bit leaky around the rubber). All bled up and good to go, put my foot down on the clutch pedal and reversed out the driveway, clutch again, into first then the master decides to empty its guts out into my footwell via the pedal ![]() ![]() My lesson learned: replace ALL parts of a clutch or brake system at once, or there might be tears / tools thrown / doors slammed / head banging against wall. |
Author: | chopchop [ Wed Feb 22, 2006 11:47 am ] |
Post subject: | |
D'oh! I learnt that lesson too. |
Author: | Morris 1100 [ Wed Feb 22, 2006 6:13 pm ] |
Post subject: | |
Don't forget to replace the hose. It is just as old as all the other bits that just failed. Hmmm, How old are all the brake rubbers? ![]() |
Author: | VeG [ Thu Feb 23, 2006 12:00 am ] |
Post subject: | |
yeah i replaced the hose, by brake rubbers do you mean the wheel cylinders? If so they are all about 2 months old. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |