there ya go
cheers
| ausmini https://www.ausmini.com/forums/ |
|
| the making of my van https://www.ausmini.com/forums/viewtopic.php?f=2&t=16626 |
Page 1 of 1 |
| Author: | mini-me [ Sun Feb 26, 2006 8:14 pm ] |
| Post subject: | the making of my van |
hi guys have finally worked out how to get my photos onto photobucket so here are the photos of my van from start to all most finished ,all done in my shed at home & its taken approx 4 months. http://photobucket.com/albums/e143/1min ... 20my%20van |
|
| Author: | matt van'74 [ Sun Feb 26, 2006 8:18 pm ] |
| Post subject: | |
|
there ya go cheers |
|
| Author: | gafmo [ Sun Feb 26, 2006 8:25 pm ] |
| Post subject: | |
Very noiuce body work... But What are the wheels you have  
|
|
| Author: | mini-me [ Sun Feb 26, 2006 8:46 pm ] |
| Post subject: | |
thanks guys , & the wheels where on it when i bought it 5 years ago but i just polished them ive been told they are off the old toranas not sure on the model but the ones before LJ |
|
| Author: | simon k [ Mon Feb 27, 2006 7:07 am ] |
| Post subject: | |
HB... that is very clean... I like it a lot |
|
| Author: | cush [ Mon Feb 27, 2006 7:37 am ] |
| Post subject: | |
i was going to say hb... 
because that's the only torana i can think of with a matching PCD 
|
|
| Author: | bnicho [ Mon Feb 27, 2006 7:51 am ] |
| Post subject: | |
cush wrote: i was going to say hb...
because that's the only torana i can think of with a matching PCD LC and LJ Four Cylinder toranas has the same PCD too.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|