Ausmini
It is currently Fri Aug 08, 2025 3:33 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Wiper motor..
PostPosted: Wed Mar 01, 2006 4:07 pm 
Offline
998cc
998cc

Joined: Thu Dec 08, 2005 10:10 am
Posts: 560
Location: Sydney, AUS
Hi All,
finally got my van today!!!!
alas the wipers are verrry tempramental!
after alot of help from steve and calm advice i hosed the thing with wd40 as it hadn't been run that often which helped for a little while

my wipers will get to about halfway and stop until i nudge them and then start again...
most of the time they won't even budge... i checked the earth connection and the wiring from the switch to the motor but i dunno!
any advice?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 4:12 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Apr 04, 2004 7:36 pm
Posts: 2146
Location: sydney
I had a similar problem.. The wiper cable that comes out the top of the motor wasn't screwed all the way in.. might help to check that?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 4:14 pm 
Offline
1098cc
1098cc

Joined: Wed Nov 24, 2004 10:23 am
Posts: 1495
Location: Armidale, NSW
Try pulling apart wiper box it's self. Mine was full of some rather solid grease and muck and worked better once I had cleaned it up and re greased it :wink:

_________________
---
Roads need more corners
A Deluxe(CG13DE), 2 Clubbies(998 and 1275) and 2 Morris 1100Ss


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 4:20 pm 
Offline
1275cc
1275cc
User avatar

Joined: Wed May 11, 2005 10:31 pm
Posts: 3747
Location: Altona, Melbourne
Thomen bringing it for fish n chips tomorrow night? :D


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 4:24 pm 
Offline
998cc
998cc

Joined: Thu Dec 08, 2005 10:10 am
Posts: 560
Location: Sydney, AUS
i will if i can find a new wiper motor!!! or one that works!!!!


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 4:31 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong
i got a 2 speed wiper motor here you could of picked up when you came over last week, bugger, if you have no luck let me know and ill hold it for you.

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 4:32 pm 
Offline
998cc
998cc
User avatar

Joined: Tue Jun 01, 2004 6:25 am
Posts: 891
Location: Sydney
honk drove his without wipers in the rain on many occasions.

Come to fish and chips

good luck.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 4:33 pm 
Offline
998cc
998cc

Joined: Thu Dec 08, 2005 10:10 am
Posts: 560
Location: Sydney, AUS
i think my current is a single speed would there be any mods in wiring it up??
how much would you want for it?
are you free tonight sometime?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 4:50 pm 
Offline
whinja ninja
whinja ninja
User avatar

Joined: Tue Jun 14, 2005 6:43 pm
Posts: 6012
Location: The Beautiful Bellarine Peninsula
poeee has problems getting his wipers to stop. Sometimes they even start when we dont want tehm to!

Blame the gremlins.

_________________
Introducing 'LITE'. The new way to spell 'light' with 20% less letters!
Image
I don't know my name anymore.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 5:57 pm 
Offline
998cc
998cc

Joined: Thu Dec 08, 2005 10:10 am
Posts: 560
Location: Sydney, AUS
hahah love the gremlins!
nearly as much as i love steve and mikey! you guys are awesome!
im so going to start the ausmini steve and mikey fan club!!!


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 6:01 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Apr 04, 2004 7:36 pm
Posts: 2146
Location: sydney
Steve wrote:
honk drove his without wipers in the rain on many occasions.


Haha yep sure did :D It wasn't light rain either.. I admit it got very scarey at some moments, all I could see was faint red brake lights in front of me, had to stick my head out the window to see.. Never again :!:


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 6:11 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
the wipers on my 850 van used to do that... they'd get half way across the screen and stall like it was too much effort to go the rest of the way - if I gave them a push they'd keep going.... When they did it half way to melbourne, I took the left hand one off and the right one worked fine after that...

I need a 2 speed wiper motor - if you don't get Brad's, can I buy it?

_________________
did I tell you that I won a trophy?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 01, 2006 6:36 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu Jun 03, 2004 2:56 pm
Posts: 3981
Location: Brisbane
Is one able to fit a two speed wiper to an 850?

_________________
But he's thriving and striving and hugging the turns.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 02, 2006 12:54 am 
Offline
998cc
998cc

Joined: Thu Dec 08, 2005 10:10 am
Posts: 560
Location: Sydney, AUS
on closer inspection the one in my van is a 2 speed just wired to run at fastest speed... as for brads im going to pick it up tommorrow!

then into my dash lining 3 bolts (as steve said!) and go from there!

what sort of glue do people usually use for gluing linings to the body? as the backing behind my speedo is glued to the sides of the shell and ill need to remove and replace glue!
thanks,
- tom


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 02, 2006 7:06 am 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border
thomen wrote:
on closer inspection the one in my van is a 2 speed just wired to run at fastest speed... as for brads im going to pick it up tommorrow!

then into my dash lining 3 bolts (as steve said!) and go from there!

what sort of glue do people usually use for gluing linings to the body? as the backing behind my speedo is glued to the sides of the shell and ill need to remove and replace glue!
thanks,
- tom


kiwkgrip - it's the same sort of yukky yellow glue

can I have your old motor then? I'll fix it ;)

_________________
did I tell you that I won a trophy?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 90 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.