| ausmini https://www.ausmini.com/forums/ |
|
| Wiper motor hooking up to 3 position lucas switch https://www.ausmini.com/forums/viewtopic.php?f=2&t=16959 |
Page 1 of 1 |
| Author: | thomen [ Wed Mar 08, 2006 9:15 am ] |
| Post subject: | Wiper motor hooking up to 3 position lucas switch |
Hi my auto electrician got access to a 3 position lucas mini switch with park... i have a 2 speed wiper motor with the following coloured wires coming off the loom red, green blue, green... (i have a leyland mini van loom from a 1976 van) does anyone know how to configure the wiper motor... i know it will need extra wires in the loom as the switch has 8 points and the wiper motor i believe has 5? (standard 2 speed wiper motor from brads leyland) ie which point on the switch goes to which terminal on the motor? and what each wire should be ie pos,neg etc etc etc... a diagram would be fantastic but a good description would be just as good! thank you all! - tom |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|