ausmini
https://www.ausmini.com/forums/

Require new points ASAP
https://www.ausmini.com/forums/viewtopic.php?f=2&t=17166		 Page 1 of 2
Author:  CRU17Y [ Tue Mar 14, 2006 7:08 pm ]
Post subject:  Require new points ASAP
Has anyone got a set of points i could get off them ASAP ie tonight??

im in castle hill
Author:  drmini in aust [ Tue Mar 14, 2006 7:31 pm ]
Post subject: 
Better post the type number of the dizzy, as different ones used different points.
Author:  CRU17Y [ Tue Mar 14, 2006 7:38 pm ]
Post subject: 
drmini in aust wrote:
Better post the type number of the dizzy, as different ones used different points.


Where would i find the type number?
Author:  drmini in aust [ Tue Mar 14, 2006 7:40 pm ]
Post subject: 
There's a number on the side of dizzy- eg 25D, 29D, 45D.
Author:  gafmo [ Tue Mar 14, 2006 7:43 pm ]
Post subject: 
Sorry Mate I missed your call but I don't have any :cry:
Since I went Pulsar I have never looked back
Author:  drmini in aust [ Tue Mar 14, 2006 7:46 pm ]
Post subject: 
I do have a new set here, for a 45D `red points' dizzy. These are the ones that have a hollow pivot in the moving point.
As Jimbo says I'll never need `em with 3 Pulsar dizzys now. 8)
Author:  CRU17Y [ Tue Mar 14, 2006 7:47 pm ]
Post subject: 
No worries Gafmo,

thanks for looking, i havn't been able to find the code on the dizzy unfortunatly.
Author:  drmini in aust [ Tue Mar 14, 2006 7:48 pm ]
Post subject: 
CRU17Y wrote:
No worries Gafmo,

thanks for looking, i havn't been able to find the code on the dizzy unfortunatly.

Take a pic, with cap off?

And, a pic of cap...
:wink:
Author:  gafmo [ Tue Mar 14, 2006 7:50 pm ]
Post subject: 
did you get the messgae off your wife :lol:

you may need t remve some f the dirt andoil it will be thier :shock:
Author:  CRU17Y [ Tue Mar 14, 2006 7:58 pm ]
Post subject: 
My wife?? you mean my mum

nah clean the dirt but it appears that i am missing a rubber bit so it doesn't connect to the earth which i am not getting a spark after the dizzy.

here are a couple of pics hard to take them though.

http://www.billoworld.com/gallery/main.php?g2_view=core.ShowItem&g2_itemId=20581

http://www.billoworld.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=20579&g2_serialNumber=1
Author:  drmini in aust [ Tue Mar 14, 2006 8:23 pm ]
Post subject: 
OK looks like a Lucas 29D to me.
Sorry, got no parts for that one... :cry:

Try Ivan at MiniSpares Castle Hill in the morning. :wink:
Author:  CRU17Y [ Tue Mar 14, 2006 8:27 pm ]
Post subject: 
drmini in aust wrote:
OK looks like a Lucas 29D to me.
Sorry, got no parts for that one... :cry:

Try Ivan at MiniSpares Castle Hill in the morning. :wink:


Thanks heaps Drmini, yeah i tried calling him on his mobile but no answer, will be needing to get it towed over in the morning for a service as well.
Author:  JAM_IT [ Tue Mar 14, 2006 8:46 pm ]
Post subject: 
I have a whole dizzy you can borrow. Late Clubby type (different to yours) Will be up till 10:30

get moving if you want to borrow it.
Author:  CRU17Y [ Tue Mar 14, 2006 8:57 pm ]
Post subject: 
JAM_IT wrote:
I have a whole dizzy you can borrow. Late Clubby type (different to yours) Will be up till 10:30

get moving if you want to borrow it.


Thanks Anton, hope be able to pick it up tonight, i will check with ivan in the morning. but i will keep in touch with you. what time do you leave in the morning??
Author:  JAM_IT [ Tue Mar 14, 2006 9:06 pm ]
Post subject: 
leaving at 7:30 am mate
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/