| ausmini https://www.ausmini.com/forums/ |
|
| gearbox? https://www.ausmini.com/forums/viewtopic.php?f=2&t=17604 |
Page 1 of 1 |
| Author: | Pin4e [ Mon Mar 27, 2006 5:11 pm ] |
| Post subject: | gearbox? |
when i push the clutch in i get a whirring nosie whats wrong with my car this time? Thanks Josh |
|
| Author: | sports850 [ Mon Mar 27, 2006 5:14 pm ] |
| Post subject: | |
Probably clutch throwout bearing , fairly easy to replace , just one of the mini design foibles ...... Unbolt the drivers side engine mount , disconnect the spring from the slave cylinder to the clutch arm , jack the drivers side of the engine up a bit , remove the 7/16th bolts around the clutch housing and take the big alloy clutch housing off (Just the first bit of it that has the clutch lever on it ) . The remove the clutch lever , undo the big bolt and take the shaft with the bearing out . Get the bearing replaced (put on with a press) and then reassemble and adjust the clutch as per the manual . |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|