ausmini
https://www.ausmini.com/forums/

Disc Brakes Fitted..
https://www.ausmini.com/forums/viewtopic.php?f=2&t=17950		 Page 1 of 2
Author:  Smokie [ Fri Apr 07, 2006 1:40 pm ]
Post subject:  Disc Brakes Fitted..
Finally have the disc brakes that were from willy's LS fitted to mine.. Still had to put on new rotors tho...

From..
Image

To...
Image
Author:  cush [ Fri Apr 07, 2006 1:42 pm ]
Post subject: 
be careful... willy brakes have a tendency to lock up and chuck your car into the rear of others..

:D


ebc pads too?
Author:  Smokie [ Fri Apr 07, 2006 1:47 pm ]
Post subject: 
No probs cush, they have been modified to stop that sort of thing... :wink:
Author:  awdmoke [ Fri Apr 07, 2006 1:50 pm ]
Post subject: 
BLING rotors too 8)
Author:  Smokie [ Fri Apr 07, 2006 1:53 pm ]
Post subject: 
Fitted the green EBC pads to the LS but fitted a black set to the Moke, so will see how much difference there is between pads...
Author:  JC [ Fri Apr 07, 2006 2:10 pm ]
Post subject: 
Nice. Rotors look good.

Why did William sell them if he is currently building a car?
Author:  cush [ Fri Apr 07, 2006 2:34 pm ]
Post subject: 
just a thought?

that's on the moke, isn't it?


what the heckaroo do you need discs on a moke for? :P
Author:  Smokie [ Fri Apr 07, 2006 2:38 pm ]
Post subject: 
These ones are on my '77 LS cush but my Moke has 8.4" discs on as well but they were standard on the '81 Califorian model...
Author:  cush [ Fri Apr 07, 2006 2:57 pm ]
Post subject: 
i'm aware they're standard... just not sure why they're there :)
Author:  Harley [ Fri Apr 07, 2006 3:37 pm ]
Post subject: 
Doing stoppies? 8)
Author:  Smokie [ Fri Apr 07, 2006 3:50 pm ]
Post subject: 
Well cush, with the high power of a 1310 in the Moke, need that good stopping ability as well... :wink:
Author:  cush [ Fri Apr 07, 2006 8:30 pm ]
Post subject: 
1310 or not...you're still driving a baking dish... not much weight to pull up.. :)
Author:  willy [ Fri Apr 07, 2006 8:36 pm ]
Post subject: 
striped 63 wrote:
Why did William sell them if he is currently building a car?



I have 10 inch wheels and these don't fit under the wheels that are 10 inches in diameter.

:wink:
Author:  tainted [ Fri Apr 07, 2006 9:09 pm ]
Post subject: 
cush wrote:
1310 or not...you're still driving a baking dish... not much weight to pull up.. :)


Baking dish, Hmmm. :?
Author:  willy [ Fri Apr 07, 2006 9:12 pm ]
Post subject: 
Says you with the GRUNTY 1100 in a farked old rusty 850 body, with COOPER S disc brakes.


Brakes worth more than the whole car, including petrol.
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/