thanks chris and hanra
larry wasnt very sure what i was talking about.
i will enquire again soon
| ausmini https://www.ausmini.com/forums/ |
|
| Rod Change Rekit/recon https://www.ausmini.com/forums/viewtopic.php?f=2&t=18067 |
Page 1 of 1 |
| Author: | 68matic [ Tue Apr 11, 2006 3:09 pm ] |
| Post subject: | Rod Change Rekit/recon |
ChrisZ told me about a rekit or recon for a rod change which involves changing cup/ball/pins? heritage mg doesnt have anything minispares padstow says theres a trade in for a recon thing for $150 can youse enlighten me on this matter? tenks |
|
| Author: | Hanra [ Tue Apr 11, 2006 5:51 pm ] |
| Post subject: | |
I have replaced the cup/socket that the gear stick sits into and also replaced the 2 bushes inside the housing. I bought the bits from Mini Kingdom way back in 97, I remember back then even it was a mission to track down part numbers...... |
|
| Author: | czerial [ Tue Apr 11, 2006 6:26 pm ] |
| Post subject: | |
Duc just get one from mini clinic. they need the business. Maybe karcraft have them as later rovers were rod change? You need to get 1- new gear stick 2- new thing that the gear stick goes in (i call it a cup) 3- new bushes (for memory im sure there are little things that you need to tap in) speak to mini clinic as you can buy all the parts seperate, but maybe a exchange one would be just as easy, |
|
| Author: | 68matic [ Tue Apr 11, 2006 7:12 pm ] |
| Post subject: | |
thanks chris and hanra larry wasnt very sure what i was talking about. i will enquire again soon
|
|
| Author: | Hanra [ Tue Apr 11, 2006 10:28 pm ] |
| Post subject: | |
The cup/socket is a fairly brittle metal, i remeber when i broke 1 when i tried replacing mine, when i was tapping the pins through for the rod, it just smashed to pieces..... I wasnt even using much force? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|