ausmini
https://www.ausmini.com/forums/

How far do 13x7's stick out from the arches?
https://www.ausmini.com/forums/viewtopic.php?f=2&t=18231		 Page 1 of 1
Author:  Mini Mad [ Mon Apr 17, 2006 5:47 am ]
Post subject:  How far do 13x7's stick out from the arches?
I'm considering buying some 13x7 wheels and i'm wondering how far they stick out from the guard?

If i get them i'd buy some miglia arches, but these come in 105mm and a wide 150mm version..just wondering what 7" wheels are closer to?
Author:  drmini in aust [ Mon Apr 17, 2006 6:44 am ]
Post subject: 
Have a look at Chris's (Twincammini)'s ones. :shock: they stick out like dogs ***s...
Dunno if the offset is `right' but he has had wheel bearing and balljoint problems with them.
I'd stick with the 13x6 Superlights like Brad has.
Author:  Mini Mad [ Mon Apr 17, 2006 6:47 am ]
Post subject: 
Yea...they look hot though ;)

I like these:
Image

They don't look as deep dished as the minilites..not sure on the offset though..
Author:  Convertible Mini [ Mon Apr 17, 2006 7:03 am ]
Post subject:  Wheel Arches for 13 inch wheels.
If any one is after a set of Wheel arches for 13 Inch wheels I have a set of Wood and Picket Arches which I got from the UK for a Project that was not even started. $250. + post. Can send Pics if any one is interested. Email address is required. Sorry Guys I have not mastered the art of posting Pics on here yet.
Author:  Gordo [ Mon Apr 17, 2006 10:20 am ]
Post subject: 
They do stick out a fair way.. These are 13 x 7 performance superlites, with only 175/50/13 rubber on them, the rim is actually wider than the rubber...

Image
Author:  sherman67 [ Mon Apr 17, 2006 11:11 am ]
Post subject: 
gordo that looks heaps tough but lol wish ya could leave them like that and go matt black yer
Author:  Mini Mad [ Mon Apr 17, 2006 8:04 pm ]
Post subject: 
Mmm..that's tough 8)

Gordo, would you be able to measure it for me? that way i would get a good idea for the width i need the arches to be. As i said i can get 105mm and 150mm :?
Author:  Gordo [ Mon Apr 17, 2006 8:20 pm ]
Post subject: 
The wheels are actually off the car atm, havnt been on it for over a year, due to the re-freshing of the van.. But from memory i think they stuck out a little over 3" prob about 3.5"
Author:  Mini Mad [ Mon Apr 17, 2006 8:28 pm ]
Post subject: 
cool..that'd be 105mm then 8)

If i get them i might just get the wheels first and then sort out flares to match..rather than guess and hope.
Author:  Gordo [ Mon Apr 17, 2006 8:31 pm ]
Post subject: 
I have 10" on the van at the moment and because i have camira brakes ont he front the 10's obviously dont fit over the brakes, so i inverted them just to roll it around on and the 10"s inverted stick out about the same width as the 13's do normally
Prob not the best pics but they are all i have atm....

Image

Image
Author:  sherman67 [ Tue Apr 18, 2006 6:40 pm ]
Post subject: 
sorry guys a bit off the subject but gordo who is the maker of ya bodykit. and is it a pain to fit??
Author:  Gordo [ Tue Apr 18, 2006 6:43 pm ]
Post subject: 
I was told it a zeemax kit, well it looks like one to me... And they do require a bit of modifying to fit them, cut the guards to suit and notch out the front flairs to suit the external hinges
and in the above pics its just sitting there not attached to anything
Author:  NAV [ Tue Apr 18, 2006 9:21 pm ]
Post subject: 
Gordo wrote:
They do stick out a fair way.. These are 13 x 7 performance superlites, with only 175/50/13 rubber on them, the rim is actually wider than the rubber...

Image


Have you got spacered drums on there?

these performance superlight 13x7 only stuck out around an inch on my van with std drums all round.

Image
Author:  Gordo [ Wed Apr 19, 2006 3:28 pm ]
Post subject: 
Yeah i have spaced drums on the rear and camira brakes on the the front...
In that photo of yours it looks more than an inch, but still its less than what was hanging out off mine
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/