ausmini
https://www.ausmini.com/forums/

HONDA DISCS
https://www.ausmini.com/forums/viewtopic.php?f=2&t=1829		 Page 1 of 1
Author:  Mini [ Wed Sep 08, 2004 1:36 pm ]
Post subject:  HONDA DISCS
My honda discs are going in today and they will be transport approved. :D

I'll let anyone interested know how it goes.

The rear bump stops & front shocks go in as well.
Author:  13secmini [ Wed Sep 08, 2004 5:20 pm ]
Post subject: 
great to here! what size you putting on? using spacers? Just imagine i didnt import the original honda brakes from NZ, people still wouldnt know about it :D
Author:  red078 [ Wed Sep 08, 2004 6:23 pm ]
Post subject: 
Hi, I love to no more about your Honda brakes, who fitted them? , and how much do they cost?, Tony
Author:  thommo09 [ Wed Sep 08, 2004 6:27 pm ]
Post subject: 
have a look at the honda disc brakes thread on here somewhere.....long, but you'll soon get the drift :)
Author:  drmini in aust [ Wed Sep 08, 2004 8:08 pm ]
Post subject: 
red078 wrote:
Hi, I love to no more about your Honda brakes, who fitted them? , and how much do they cost?, Tony


Honda brake thread is here-
http://inlope.com/~tzi/ausmini/viewtopic.php?t=163
Author:  Mini [ Sat Sep 11, 2004 7:41 pm ]
Post subject: 
It took longer than expected, they work great.

Don't know the total cost yet (the next set they do will be cheaper).

They are a transport aprroved mod, just need to put my new flares on.

Done by Willson Automotive.

Things I may do down the track:

1. Fit cooper rear cylinders
2. Green stuff pads.

I would recommend this mod, its half the price of anything else.
Author:  thommo09 [ Sun Sep 12, 2004 1:33 pm ]
Post subject: 
have you got any pics you can share with us?
Author:  low n blown [ Sun Sep 12, 2004 2:02 pm ]
Post subject: 
Fellas,
check with your state first before rushing out and putting on your custom discs. I checked with QLD transport as I have custom 10.5inch discs made and apparently the engineer certificate is not enough. I have to take the brakes for some sort of brake test that is done on a rolling road thing. Apparently they are a bitch to get passed despite how good they work. Go figure!!!
Author:  drmini in aust [ Sun Sep 12, 2004 2:29 pm ]
Post subject: 
`animal' up in Qld has already had his Honda ones passed by Qld Roads. Ping him... :wink:
Author:  Mini [ Sun Sep 12, 2004 4:40 pm ]
Post subject: 
Sorry no pics, they have to approve each set they install, i'll end up with a plate under the bonnet saying that the brakes are approved for my car only.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/