ausmini https://www.ausmini.com/forums/ |
|
Seat Pin Removal https://www.ausmini.com/forums/viewtopic.php?f=2&t=18353 |
Page 1 of 1 |
Author: | matt van'74 [ Thu Apr 20, 2006 10:17 am ] |
Post subject: | Seat Pin Removal |
Gday All i just recently got my clubby some better low back clubman seats but they came with out the pins that hold the base to the back. so i will have to salvage the ones. is there anyway to remove these without wrecking them? any hints are most appreciated Cheers |
Author: | matt van'74 [ Thu Apr 20, 2006 6:54 pm ] |
Post subject: | |
come on surely someone knows ![]() |
Author: | 9YaTaH [ Thu Apr 20, 2006 7:11 pm ] |
Post subject: | Ummmmmm??? |
Mr Angle Grinder ![]() ![]() |
Author: | matt van'74 [ Thu Apr 20, 2006 7:15 pm ] |
Post subject: | |
i want to "SALVAGE" them so any other suggestions ![]() |
Author: | JAM_IT [ Thu Apr 20, 2006 7:58 pm ] |
Post subject: | |
hmmmm...... I took mine out when my seats were retrimmed last year. I can't remember exactly HOW, but I don't reacall having ANY problems. I have high back Clubman seats. |
Author: | sherman67 [ Thu Apr 20, 2006 8:12 pm ] |
Post subject: | |
angle grinder and then replace with nut and bolt |
Author: | matt van'74 [ Thu Apr 20, 2006 8:39 pm ] |
Post subject: | |
thanks ![]() will see how i go cheers |
Author: | 64cooper [ Thu Apr 20, 2006 8:59 pm ] |
Post subject: | |
Well the ones I have stripped down have been no problem as the pin has had a circlip on the inside and once removed ,the rest is a piece of cake. IF you have to cut the pins, then I may still have a few with clips lying around if you end up needing some. David |
Author: | JAM_IT [ Thu Apr 20, 2006 9:19 pm ] |
Post subject: | |
yep, thats it! a circlip. maybe the earlier Clubby seats are different and don't have that? |
Author: | matt van'74 [ Thu Apr 20, 2006 9:23 pm ] |
Post subject: | |
yeah these have a little clip, hopefully i wont need to cut them but if do i might have to PM you, DWASmith if icant source some locally ![]() cheers |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |