Ausmini
It is currently Mon Jul 21, 2025 11:27 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: hmmph.
PostPosted: Sat Apr 22, 2006 4:06 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 19, 2005 3:48 pm
Posts: 73
Location: North Shore, Sydney
Alright... two problems with coopa at the moment, none serious but annoying none the less.

First off, 3rd is getting a little difficult to get into. The car has a shortshift however im not sure what it is, might be a KAD might be a minisport, i dont know. Anyway, going up into third from second is quite difficult, i have been able to double into it, however sometimes it grabs first? This only really happens when the car is under load, ie, when im pushing it. low rpm it is fine.

Secondly, at around 5000rpm, it makes some sort of rattle noise. Sounds like from the LHS but cant be sure it makes so much noise at that rpm its hard to tell. The engine reaches peak power at 6800 apparently, and gets there fine when its in neutral (its actually quite happy to go up there).

Opinions? Thoughts? Car isnt taken out regularly and these issues can be lived through however id like to get them fixed!

_________________
Present owner of Coopa.S


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 22, 2006 7:48 pm 
Offline
Resident Haemorrhoid
User avatar

Joined: Mon Jan 31, 2005 7:47 pm
Posts: 6815
Location: in da ACT
For the third gear issue check that the two screws holding the top plate if the gearstick ballie thing in place are tight i couldnt select third recently amd one of teh screws had popped out and fell into the ball+ cup area and blocked third :twisted:

_________________
mtsmini wrote:
Master, you are wise beyond your years.....I am a mere grasshopper before you :D

Tombo wrote:
Gadgets has never been so right :D


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 22, 2006 11:45 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 19, 2005 3:48 pm
Posts: 73
Location: North Shore, Sydney
Well what i meant by difficult to get into, was that it goes.... CRUNCH! like there was no syncro. but then it shifts from 4th back to 3rd perfect? and 2nd to 3rd fine at lower rpms (3k).... odd.

_________________
Present owner of Coopa.S


Top
 Profile  
 
 Post subject:
PostPosted: Sun Apr 23, 2006 1:12 am 
Offline
1360cc
1360cc

Joined: Mon Nov 01, 2004 4:36 pm
Posts: 7673
worn selector fork?

the noise could be anything, timing chain maybe


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 96 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.