You could remove the non rusty pockets off a rusty door and weld them on. I have to remove the pockets off my rusty LS doors to fit them onto a pair of doors that someone removed the pockets from. (ricer
)
| ausmini https://www.ausmini.com/forums/ |
|
| Can you buy replacement door pocket panels? https://www.ausmini.com/forums/viewtopic.php?f=2&t=18370 |
Page 1 of 1 |
| Author: | Bromley [ Thu Apr 20, 2006 9:55 pm ] |
| Post subject: | Can you buy replacement door pocket panels? |
You know the the pocket that you sit your flashlube in your door - wondering if you can buy a replacement one of those? Discovered huge rust holes in my freshly stripped doors. If you can't I will just use fiberglass. |
|
| Author: | Bromley [ Sun Apr 23, 2006 9:45 pm ] |
| Post subject: | |
bump |
|
| Author: | poeee [ Sun Apr 23, 2006 9:48 pm ] |
| Post subject: | |
I very much doubt it. Australian wind up window doors were the only ones to have pockets like they are. Sliding window doors had a deeper pocket and Rover Mini style doors (mk3 onwards??) didn't have a pocket. |
|
| Author: | Morris 1100 [ Sun Apr 23, 2006 9:51 pm ] |
| Post subject: | |
You could remove the non rusty pockets off a rusty door and weld them on. I have to remove the pockets off my rusty LS doors to fit them onto a pair of doors that someone removed the pockets from. (ricer )
|
|
| Author: | Bromley [ Sun Apr 23, 2006 9:57 pm ] |
| Post subject: | |
Thanks |
|
| Author: | mad-mk1 [ Sun Apr 23, 2006 10:16 pm ] |
| Post subject: | |
hey man, i think i still have a set of these, removed them from my 850 cos my bucket seats were too big, pm me if ur interested! |
|
| Author: | GeoffP [ Sun Apr 23, 2006 10:41 pm ] |
| Post subject: | |
they are around but probably not brand new. A few years ago I bought a couple (when I was going to restore the deluxe i used to have) from one of the Mini parts places here in Perth (Minicraft) - they were $20 each for rust free second hand pockets - they had plenty of them then and I'm sure plenty of places would still have them now... G |
|
| Author: | 9YaTaH [ Mon Apr 24, 2006 9:38 am ] |
| Post subject: | 850 |
mad-mk1 wrote: hey man, i think i still have a set of these, removed them from my 850 cos my bucket seats were too big, pm me if ur interested!
Unless Brom has sliding window doors I think you will find the pockets are different. Andy, find another door or a a donor door where the pockets are OK and carefully cut and shut 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|