ausmini
https://www.ausmini.com/forums/

Weight of 1275
https://www.ausmini.com/forums/viewtopic.php?f=2&t=18383		 Page 1 of 1
Author:  Matt68 [ Fri Apr 21, 2006 8:56 am ]
Post subject:  Weight of 1275
Hi,

I've got to look into freight costs for a 1275 from QLD to GRs place in sydney. I need to know some weights to get prices.

1275 Block - Bare (from 1100s)
Rods with Pistons
Crank

Any help?

Cheers
matt
Author:  aaron [ Fri Apr 21, 2006 9:02 am ]
Post subject: 
http://www.ausmini.com/forums/viewtopic ... ht=#243424

might be worth contacting justmini as he is going past GR's place on his trip down. :wink:

Cheers


Aaron
Author:  Matt68 [ Fri Apr 21, 2006 10:20 am ]
Post subject: 
Thanks,

But steve looks like he may not be going now!
Hence the need for freight pricing!

(i needed to freight it home anyway!)

Cheers
matt
Author:  Matt68 [ Fri Apr 21, 2006 10:22 am ]
Post subject: 
So anyone got the weights handy?

Doesn't need to be exact within a Kg is close enough for me!
:wink:


Matt
Author:  Matt68 [ Fri Apr 21, 2006 5:26 pm ]
Post subject: 
anyone?

Leave me a note, I'll be back monday. Ahh, weekends.... 8) 8)

Matt
Author:  feralsprint [ Fri Apr 21, 2006 5:42 pm ]
Post subject: 
Might pay you to ring GR and find out if he has someone he uses and if so use them both ways :D

Jon
Author:  Matt68 [ Tue May 16, 2006 2:15 pm ]
Post subject:  Weight of 1275 for freighting
Just so anyone else who wants to send there block somewhere (GRs for example) :wink: :wink: can work out the cost;

1275 block (1100s based)
Crank
Rods
Pistons
cam
(assembled)

Packed in a extra H/D box with ply underneath and at the ends.

Weighed 56kgs


The other box with flywheel(3.7kg), clutch assy, engine backing plate new pistons and harmonic balancer was 10kg packed.


Freight to Russell Engineering from Warwick in QLD was about $80.00


Hope this comes in handy for someone!
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/