yea, or just use a telescopic inspection mirror
I have 5 of them....
| ausmini https://www.ausmini.com/forums/ |
|
| Neat idea https://www.ausmini.com/forums/viewtopic.php?f=2&t=1884 |
Page 1 of 1 |
| Author: | Wombat [ Mon Sep 13, 2004 1:38 pm ] |
| Post subject: | Neat idea |
Easy to knock up http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&category=32072&item=2489000475&rd=1#ebayphotohosting |
|
| Author: | J_A_M [ Mon Sep 13, 2004 1:52 pm ] |
| Post subject: | |
yea, or just use a telescopic inspection mirror I have 5 of them....
|
|
| Author: | Wombat [ Mon Sep 13, 2004 2:34 pm ] |
| Post subject: | |
But you've got to hold them in one hand or prop it some how and it always falls over just when you don't want it to |
|
| Author: | simon k [ Mon Sep 13, 2004 4:10 pm ] |
| Post subject: | |
soooo handy - I keep meaning to make one too, but then I don't have a timing light either.... a mate of mine has an original BMC one I use when I'm tuning at his workshop - says for morris 850 and 1100 on the side of the box |
|
| Author: | drmini in aust [ Mon Sep 13, 2004 6:37 pm ] |
| Post subject: | |
Not much good if your flywheel as been lightened and there's no marks anymore... (like all mine!) 
And if you have a MiniMatic/Deluxe freshair heater, forget it! I marked the crank pulley, much easier to see.
|
|
| Author: | Mike [ Tue Sep 14, 2004 3:09 am ] |
| Post subject: | |
Or just use an old small makeup mirror from the (girlfriend\sister\ mother\ secret transvestite fantasy) and some blue tac. |
|
| Author: | bnicho [ Tue Sep 14, 2004 12:50 pm ] |
| Post subject: | |
I use a roundnose interior mirror and a bit of wire to secure it! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|