| ausmini https://www.ausmini.com/forums/ |
|
| Getting the choke working https://www.ausmini.com/forums/viewtopic.php?f=2&t=19095 |
Page 1 of 1 |
| Author: | Fat80y [ Thu May 11, 2006 1:32 pm ] |
| Post subject: | Getting the choke working |
Now that the cool mornings are here, and the choke is required to start, I've decided to fix mine up properly. Have always used the el cheapo supercheap one, they are CRAP. Very stiff to use, always jam on etc etc. Can anyone suggest a method to get nice smooth operating choke? |
|
| Author: | 1360 LS [ Thu May 11, 2006 1:39 pm ] |
| Post subject: | |
i alil wd40 on the thing u pull and a new cable and attach it properly. its what ive done and it works fantastic |
|
| Author: | Mick [ Thu May 11, 2006 1:48 pm ] |
| Post subject: | |
I seem to remember that teh MKII choke cables mounted through starter/ light/wiper switch panel iside the car has a soft inner cable like a accelerator cable. It operates pretty smoothly from what I remember, unlike the stiff wire versions. |
|
| Author: | Fat80y [ Thu May 11, 2006 5:14 pm ] |
| Post subject: | |
That's what I wanted to hear Mick, the stiff wire ones are rubbish, get one tiny kink in them, and they stick... |
|
| Author: | Mick [ Thu May 11, 2006 6:57 pm ] |
| Post subject: | |
They're not very long though, so you have to be economical when running them. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|