ausmini https://www.ausmini.com/forums/ |
|
Aliens https://www.ausmini.com/forums/viewtopic.php?f=2&t=19178 |
Page 1 of 1 |
Author: | Dixon Bainbridge [ Sat May 13, 2006 10:15 pm ] |
Post subject: | Aliens |
Howdy all, I have another problem with the ol' mini. I dunno if this is a common problem for the mini, but whenever I make a mild left turn there is a strange noise, which sounds like an alien from outta space, coming from the rear of the car. Has anybody else had this problem before? |
Author: | Harley [ Sat May 13, 2006 10:48 pm ] |
Post subject: | |
Hmmm, now if it was a leprechaun or a ghost in the engine bay I might be able to help, but sorry, I don't do aliens. ![]() Good luck. |
Author: | HPDesign [ Sun May 14, 2006 1:58 am ] |
Post subject: | |
have you checked your rear left and right wheel bearings? if it's a whurring or high pitched vibration it's a good place to start. jach the caar up at the rear and check for free play sideways with the rear wheels on. no noise or movment is good |
Author: | adeee [ Sun May 14, 2006 1:49 pm ] |
Post subject: | |
minis also have gremlins, but they can be atrributed to the prince of darkness. He only has power over electrical issues though. |
Author: | Dixon Bainbridge [ Sun May 14, 2006 10:50 pm ] |
Post subject: | |
Hehe, thanks for the advice about the bearings. I checked the back wheels and there seems to be a bit too much play, so I will see how to change them over in the manual and hopefully no more invasions. But the aliens were good for scaring mates when I took them for a drive. |
Author: | drmini in aust [ Sun May 14, 2006 11:05 pm ] |
Post subject: | |
Note the LR hub nut is LEFT HAND thread... if you are wondering why the bugger won't undo... ![]() |
Author: | HPDesign [ Mon May 15, 2006 1:31 pm ] |
Post subject: | |
if it matters too you the taper bearings are better than the roller type they last a bit longer. considering it's not the most "clean" fun you can have with your mini it might be worth not having to do again for a while |
Author: | Dixon Bainbridge [ Mon May 15, 2006 5:41 pm ] |
Post subject: | |
Thanks for the tips. With the thread, I found that out a couple of weeks ago when I put just about all my effort into undoing it. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |