Standard Moke 13" steel rim 245mm ID flush at the hub,
increasing to about 260mm where the brakes would be.
helpful?
| ausmini https://www.ausmini.com/forums/ |
|
| Who has 13" wheels? https://www.ausmini.com/forums/viewtopic.php?f=2&t=19511 |
Page 1 of 1 |
| Author: | Metalfab_101 [ Wed May 24, 2006 8:07 am ] |
| Post subject: | Who has 13" wheels? |
Can someone do me a little favour? Just been looking at some brake options, and need some info. Can someone measure the ID of the rims from the back? A few different types would be good so post em if you have em pls! |
|
| Author: | GTi_Mini [ Wed May 24, 2006 10:20 am ] |
| Post subject: | |
you tell me how I measure it and I'll give it a go. lol. what you mean by ID??? |
|
| Author: | miniboy1962 [ Wed May 24, 2006 10:53 am ] |
| Post subject: | |
Inside Diameter |
|
| Author: | awdmoke [ Wed May 24, 2006 11:10 am ] |
| Post subject: | |
Standard Moke 13" steel rim 245mm ID flush at the hub, increasing to about 260mm where the brakes would be. helpful?
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|