| ausmini https://www.ausmini.com/forums/ |
|
| Hi-Lo's https://www.ausmini.com/forums/viewtopic.php?f=2&t=19562 |
Page 1 of 1 |
| Author: | miniboy1962 [ Thu May 25, 2006 1:32 pm ] |
| Post subject: | Hi-Lo's |
I was hoping to make up my own Hi-Los and was hoping that someone would have measurements or a drawing of them, even a scanned hand drawing would be awesome. How does the thread join onto the ball? I've been told they make the mini sit a lot nicer and since i'm re-doing everything anyway... Anyways, Any help would be awesome. Thank, Daniel. |
|
| Author: | Andy [ Thu May 25, 2006 2:02 pm ] |
| Post subject: | |
im keen to try turning some up too, so very keen to see peoples opinions how difficult it is and past experiences. Design looks simple enough to reproduce. |
|
| Author: | willy [ Thu May 25, 2006 2:26 pm ] |
| Post subject: | |
Billet alloy isn't cheap. Probably worth just buying off-the-shelf items instead of hand-fab, with things like this... |
|
| Author: | miniboy1962 [ Thu May 25, 2006 2:38 pm ] |
| Post subject: | |
Just checked eBay and they wanted $155 for the rear and $110 for the front, and thats without postage. http://search-desc.ebay.com.au/search/s ... =&saprchi= How expensive is this alloy?? Is that just a Bolt with a hole drilled into the head?? |
|
| Author: | feralsprint [ Thu May 25, 2006 2:49 pm ] |
| Post subject: | |
get in touch with Matt the miniman in Brissy, he makes them and they are cheaper than those ones Jon |
|
| Author: | miniboy1962 [ Thu May 25, 2006 4:44 pm ] |
| Post subject: | |
Did a bit of searching through the archives. http://www.ausmini.com/forums/viewtopic ... drawing%2A |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|