ausmini
https://www.ausmini.com/forums/

LS off road
https://www.ausmini.com/forums/viewtopic.php?f=2&t=19643		 Page 1 of 2
Author:  1360 LS [ Sun May 28, 2006 1:37 pm ]
Post subject:  LS off road
Had a accident last night a silver nissan patrol reversed into my driver door and its now comepletly mangled. Thankfully it wasn't my fault and now will have to get it fixed. Does anyone know where a good panel and painter is around my area. I live in Five Dock Sydney. I will post pics soon of the damage. No one was hurt thank god but what a hassell, at least I have lost my licence anyways from the 21st of june for 9 months that'll give me enough time to the little car up and bring it back up to scratch.
Author:  sports850 [ Sun May 28, 2006 1:48 pm ]
Post subject: 
Sorry to hear about the bent door , were you driving or was it parked at the time ? Hope the insurance doesn't stuff you around too much and you can find a decent panel shop to look after it . Did it do any other damage to it or just mangle the door ?
Author:  Mike_Byron [ Sun May 28, 2006 6:00 pm ]
Post subject: 
If its a mini and its bent and its insured - then take it to Rocky Canto in Smithfield. I dont have the phone number off the top of my head But Rocky has 30 years of mini repairs

Canto Smash repairs.
Author:  1360 LS [ Sun May 28, 2006 10:27 pm ]
Post subject: 
sports850 wrote:
Sorry to hear about the bent door , were you driving or was it parked at the time ? Hope the insurance doesn't stuff you around too much and you can find a decent panel shop to look after it . Did it do any other damage to it or just mangle the door ?


I was driving looking for a park the thing got me after i had my hand on the horn for several seconds he kept reversing into me. I'll have at least 1 photo but tommorow, no other damage thank god.
Author:  68matic [ Sun May 28, 2006 10:32 pm ]
Post subject: 
my thoughts while reading were "sheet he was speedin the other week hope he wasnt driving unlicensed" but all seems ok. the lucky thing is they only got the door hopefully none of the shell
Author:  1360 LS [ Sun May 28, 2006 10:35 pm ]
Post subject: 
no shell damge I checked and so did my dad but of course only a panel beater could say for certain organising the incident number tommorow and contacting my lovely insurer tommorow
Author:  Betty [ Sun May 28, 2006 11:25 pm ]
Post subject: 
What a stupid nissan patrol driver !
:x
Author:  czerial [ Mon May 29, 2006 1:00 am ]
Post subject: 
mate that sucks. sorry to hear that,. hope the fcar is ok! :shock: :shock:
Author:  NurseMini [ Mon May 29, 2006 5:20 pm ]
Post subject: 
well you are off the road as well as the mini you could do some work on it make it extra special when you can drive again,


wendy
Author:  1360 LS [ Mon May 29, 2006 7:31 pm ]
Post subject: 
Thanks for al of your concern and yes it'l give loads of time to save money and progressively turen my LS is the beast that I desire it to be. plenty of time to touch things up replace others nad fix more. I swear you lot get the shock of your lives once it done. grins ... but alas I doubt now wether i can be in mini's down under but I shall certainly give all of you the support of beasts of minis' deseves.


Anyways I will keep you all posted about the dorr being fixed but as to the fial product once i get my licence back you'll have to see it to believe it.

anyways thaks again for ur sup;oprt and concern,

kind regards Zack
Author:  LS1380 [ Thu Jun 01, 2006 9:45 pm ]
Post subject: 
Take your time and get it fixed properly.
This is my LS last week-back from the Panelshop and Spraypainters.
Image
Author:  willy [ Thu Jun 01, 2006 10:00 pm ]
Post subject: 
I farken LOVE that car, LS1380, and you know it :!: :D

Looks so fresh and proper.


Why did you have it at the beaters?
Author:  LS1380 [ Thu Jun 01, 2006 10:27 pm ]
Post subject: 
It started out as a small rust area behind the door hinges,then it got bigger and bigger.
Rust around the back window and rust on the lower side window frames.
After that was all fixed-I could not find a spraypainter that would "blend" the colour in.
So it was a complete strip out(thanks to my brother) and back to a spraypainter to re-paint the LS.
Then put all the glass and interior back in,ready for this weekends Historic Round the Houses weekend. :D
It never stops with a Mini!!
Author:  willy [ Thu Jun 01, 2006 10:39 pm ]
Post subject: 
Ah yep, typical LS rust....


Muchos creditos to you... it looks fabulous.
Pity about the dent around the top hinge tho. :cry:
Author:  LS1380 [ Thu Jun 01, 2006 10:45 pm ]
Post subject: 
No-Not a dent!!
Gives you the "willys' though-When you tighten and adjust the door hinges,it pulls the shape
of the top hinge onto the door panel...
Bastard of a idea :roll:
Just like when you tighten the nuts on the outer door handle-It distorts the panel around the handle.
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/